Operating AC Appliances
Operating Several Appliances at Once
You can run several AC appliances if the total rating of all the appliances (in watts) does not exceed 320 W. You can run appliances using an AC power bar.
Run time, however, will decrease accordingly with the number of appliances being operated and the AC power being consumed.
Operating an AC Appliance
Before operating your AC appliance, ensure that the battery of the XPower Powerpack is fully charged. See “Recharging with the AC Charger” on page
To operate an AC appliance:
1.Open the protective covering on the right side of the XPower Powerpack. Turn the AC Outlet On/Off switch to the On position.
The switch illuminates to indicate AC power is available at the AC Outlets.
2.Plug the AC appliance into one of the AC Outlets and turn the appliance on. XPower Powerpack will operate most devices rated up to 320 W.
3.Recharge the XPower Powerpack as soon as possible after each use.
When using the XPower Powerpack to operate an AC appliance and the low battery warning sounds, the warning gives you time to shut your AC appliance off before loss of AC power.
If you ignore the warning, the XPower Powerpack automatically turns off a few minutes later to prevent battery damage.
In the event of an overload, low battery voltage or overheating, the XPower Powerpack automatically shuts down.