Troubleshooting Reference
Table 5-1 Troubleshooting reference
|
| |||
ProblemPossibleCause | Solution | |||
The | The valve conn ctor | Check that the valve connector is | ||
compr ssor | may not be securely | sec | rely placed on the valve stem | |
runs but won’t | placed on the valve | before closing the thumb latch. | ||
inflate | stem. |
|
|
|
(XPower |
|
|
|
|
owerpack | The item being | Check that the item being inflated | ||
400 Plus only). | inflated may have a | has no leaks. | ||
| leak. |
|
|
|
|
|
| Check the compressor hose for any | |
|
|
| breaks r leaks at connections. | |
The | The compressor may | Turn off the compressor and let it | ||
compr ssor | have ov rheated from | c | down. | |
runs slowly | excessive | . |
|
|
(XPower |
|
|
|
|
owerpack | Battery volt ge is too | Check the condition of the internal | ||
400 Plus only). | low. |
| battery. The battery may need to be | |
|
|
| recharged or replaced. | |
|
|
| ||
The engine | XPower Powerpack | Recharge the XPower Powerpack | ||
being jump- | battery is not fully | battery. | ||
started will not | charged. |
|
|
|
start. |
|
|
|
|
| The engine condition | Have the engine serviced. | ||
| is poor. |
|
|
|
| External fuse (250 A) | Replace 250 A, 32 V fuse with same | ||
| is blown. |
| type and ratings. |
The engine start capacity exceeds the XPower Powerpack
|