Yazoo/Kees ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, ZMKW61231 Setup and Adjustments

Page 15

SETUP AND ADJUSTMENTS

WARNING!

No settings or adjustments are to be made unless: Engine is stopped, key has been removed, park brake is on and bat- tery cable removed from battery.

4.Torque all 1/2” hardware to 80 ft./lbs. (110 N•m).

5.Install and tighten knobs against the side post.

Setup

Uncrate machine.

ROPS Assembly

(Roll Over Protection System)

ROPS Assembly Components

1 - Top Loop

1 - Left Side Post

1 - Right Side Post

1 - Hardware Bag

2 - 1/2” Latch Pins w/lanyard

6 - 1/2C x 3 1/4” Cap screws

6 - 1/2C Centerlock Nuts

2 - Knobs

(all hardware Grade 5).

1.Remove roll bar and parts bag from the box.

2.Install roll bar side posts.

a.Locate the LEFT and RIGHT side posts.

b.Slilde the left side post into the left side receiver on the frame, do the same on the right side.

c.Using 1/2C x 3 1/4 cap screws, two per post, align the holes in the side post with the frame receiver.

d.Install the 1/2C centerlock nuts finger tight to the side post bolts.

3.Install roll bar top loop.

a.Align the holes of the top loop with the left and right side posts.

b.Slide the latch pins thru the front hole on the left and right side to connect the top loop to the side posts and secure with the hairpin.

c.Using 1/2C x 3 1/4 cap scrws thru the rear hole on the left and right side.

d.Install the 1/2C centerlock nuts finger tight.

LATCH PIN

TOP LOOP

 

KNOB

1/2C X 3 1/4

 

CAPSCREW

 

 

1/2C CENTERLOCK

 

NUT

 

RIGHT SIDE

 

POST

LEFT SIDE

 

POST

1/2C CENTERLOCK

 

NUTS

1/2C X 3 1/4

 

CAPSCREWS

 

Tires

 

Mount rear drive wheels using the lug nuts installed on the hubs.

Check the tire pressure in all four tires. All tires should be 15 psi.

15

Image 15
Contents Manual no REV. IR 09/13/04 ZMBI48181 ZMKW48191 ZMKW52211 ZMKW52231 ZMKH52231 ZMKW61231Page Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Do as follows Driving on SlopesChildren Maintenance8011-563 Important Information TransportCustomer Responsibilities Roll Over Protection SystemPresentation PresentationSetup and Adjustments Rops Assembly Roll Over Protection SystemTires Engine Oil AdjustmentsSeat Install Control ArmsPark Brake Adjustment For Model ZBMI48181 Mower Deck LevelingThrottle Lever Tension Motion Control Linkage Adjustment Operating instructions OperationPump Release Key SwitchHour Meter Fuel Shut OffMower blades MaintenanceSafety interlock system Cutter HousingsDeck belt HardwareAir filter Hydraulic systemFuel filter Pump beltLubrication Tire pressureTorque Specifications Maintenance Schedule Problem Trouble ShootingPage Wiring Diagrams Wiring Diagrams

ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, ZMKW61231 specifications

Yazoo/Kees is a well-regarded name in the turf care and landscaping equipment industry, particularly known for its innovative lawn care solutions. Among its impressive lineup, the models ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, and ZMKW61231 stand out for their performance, durability, and advanced technology.

The ZMBI48181 is a robust mower designed for commercial use, featuring a powerful engine and a high-quality deck that delivers exceptional cutting performance. Its intuitive controls and ergonomic design enhance usability, ensuring that operators can work comfortably over extended periods. The ZMKW48191, on the other hand, is a compact model ideal for small to medium-sized properties. Its maneuverability combined with efficient cutting capabilities allows users to navigate tight spaces without sacrificing performance.

Moving on to the ZMKW52211 and ZMKW52231 models, these mowers feature Yazoo/Kees’s patented cutting technology, which ensures a clean cut while minimizing clumping and optimizing grass health. Both models are equipped with high-efficiency engines, offering fuel savings and reduced emissions, aligning with contemporary environmental standards.

The ZMKH52231 model introduces a hybrid option that blends traditional gas-powered engines with electric elements. This unique design not only improves fuel efficiency but also reduces noise levels, making it suitable for residential areas or noise-sensitive environments.

Finally, the ZMKW61231 is perhaps the apex of the lineup. This industrial-grade mower excels in heavy-duty applications with its powerful performance and large cutting deck. It's designed for large properties or commercial landscaping companies needing reliable equipment for extensive grass management.

Across these models, Yazoo/Kees emphasizes durability and ease of maintenance. Constructed from high-quality materials, these mowers are designed to withstand the rigors of outdoor use. Features like easy-access service points and robust frames contribute to their longevity.

In summary, the Yazoo/Kees ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, and ZMKW61231 represent a collection of cutting-edge lawn care equipment. Each model brings unique attributes suited for various tasks, but they all share a commitment to performance, efficiency, and user comfort. For homeowners and professionals alike, these mowers provide reliable solutions that enhance productivity while delivering superior results on every lawn.