Yazoo/Kees ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, ZMKW61231 manual Adjustments

Page 16

SETUP AND ADJUSTMENTS

Control Arms

Remove top bolt in control arm and loosen bot- tom bolt, rotate the control levers to the upright position. Align the levers so they are even in the neutral position. Reinstall hardware and tighten. FIG - 1

Seat Install

1.Remove seat assembly from the crate.

2.Remove the four 5/16C nyloc nuts or 5/16C studed knobs from the bottom of the seat. Retain for use later.

3.Align the seat bottom with the holes in the seat frame. Place seat on top of the seat frame and secure with the four nuts or knobs re- moved in step 2.

4.Connect the wire harness from the seat to the frame harness.

Engine Oil

Check engine oil with dip stick. Add if needed per the engine manufactures specifications. See en- gine manual for oil type and filling specifications. FIG - 2

Loosen the discharge chute slightly and lower into position. Chute should be snug but still pivot freely.

Control

Motion

Arm

Control

 

Lever

FIG - 1

“F” Full

Operating Mark

Range

FIG - 2

Lift Lever

Adjustments

 

Cutting Height

 

Stop the mower and disengage the blades.

Deck Height

 

Raise the deck height lever to the transport posi-

Adjusment Plates

tion.

 

Remove the height adjustment pin and place it in

 

the desired cutting height hole. Lower the lift lever

 

down onto pin. NOTE: Anti-scalp rollers must be

 

in the proper position for maximum deck floata-

 

tion. See the decal on the front deck for proper

 

settings. FIG - 3

 

FIG - 3

16

Page 15 Page 17
Image 16
Page 15 Page 17
Contents ZMBI48181 ZMKW48191 ZMKW52211 ZMKW52231 ZMKH52231 ZMKW61231 Manual no REV. IR 09/13/04Page Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Driving on Slopes Do as followsMaintenance Children8011-563 Transport Important InformationRoll Over Protection System Customer ResponsibilitiesPresentation PresentationRops Assembly Roll Over Protection System Setup and AdjustmentsTires Adjustments Seat InstallControl Arms Engine OilMower Deck Leveling Park Brake Adjustment For Model ZBMI48181Throttle Lever Tension Motion Control Linkage Adjustment Operation Operating instructionsKey Switch Hour MeterFuel Shut Off Pump ReleaseMaintenance Safety interlock systemCutter Housings Mower bladesHardware Air filterHydraulic system Deck beltPump belt LubricationTire pressure Fuel filterTorque Specifications Maintenance Schedule Trouble Shooting ProblemPage Wiring Diagrams Wiring Diagrams

ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, ZMKW61231 specifications

Yazoo/Kees is a well-regarded name in the turf care and landscaping equipment industry, particularly known for its innovative lawn care solutions. Among its impressive lineup, the models ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, and ZMKW61231 stand out for their performance, durability, and advanced technology.

The ZMBI48181 is a robust mower designed for commercial use, featuring a powerful engine and a high-quality deck that delivers exceptional cutting performance. Its intuitive controls and ergonomic design enhance usability, ensuring that operators can work comfortably over extended periods. The ZMKW48191, on the other hand, is a compact model ideal for small to medium-sized properties. Its maneuverability combined with efficient cutting capabilities allows users to navigate tight spaces without sacrificing performance.

Moving on to the ZMKW52211 and ZMKW52231 models, these mowers feature Yazoo/Kees’s patented cutting technology, which ensures a clean cut while minimizing clumping and optimizing grass health. Both models are equipped with high-efficiency engines, offering fuel savings and reduced emissions, aligning with contemporary environmental standards.

The ZMKH52231 model introduces a hybrid option that blends traditional gas-powered engines with electric elements. This unique design not only improves fuel efficiency but also reduces noise levels, making it suitable for residential areas or noise-sensitive environments.

Finally, the ZMKW61231 is perhaps the apex of the lineup. This industrial-grade mower excels in heavy-duty applications with its powerful performance and large cutting deck. It's designed for large properties or commercial landscaping companies needing reliable equipment for extensive grass management.

Across these models, Yazoo/Kees emphasizes durability and ease of maintenance. Constructed from high-quality materials, these mowers are designed to withstand the rigors of outdoor use. Features like easy-access service points and robust frames contribute to their longevity.

In summary, the Yazoo/Kees ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, and ZMKW61231 represent a collection of cutting-edge lawn care equipment. Each model brings unique attributes suited for various tasks, but they all share a commitment to performance, efficiency, and user comfort. For homeowners and professionals alike, these mowers provide reliable solutions that enhance productivity while delivering superior results on every lawn.
Top Page Image Contents