Yazoo/Kees ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, ZMKW61231 manual Operation

Page 19

OPERATION

Operating instructions

Roll Bar and Seat Belt

Operate the unit with the roll bar in the raised and locked position and use seat belt. There is no rollover protection when the roll bar is down. If it is necessary to lower roll bar do not wear the seat belt. Raise the roll bar as soon as clearance per- mits.

Starting and operation

Operator must be sitting in the seat. Engage the park brake, blades disengaged and the motion control levers in the neutral slots.

Set choke (if needed) turn key and release as soon as engine starts. Adjust throttle to half and shut choke off.

Release parking brake.

Close motion control levers.

Engage blades and set RPM to maximum. CAU- TION: Be sure all persons are clear of the area before engaging blades.

CONTROLS

Be familiar with all controls their function and how to operate them before starting the machine.

Motion Control Levers

Motion control levers on each side of the console control the direction of movement. The left lever controls the flow of oil from the left hydro pump to the left wheel motor. The right lever controls the flow of oil from the right hydro pump to the right wheel motor.

NOTE: To begin motion the operator must be in the seat and the parking brake disengaged before the motion control levers can be moved from the neutral slots or the engine will kill.

FIG - 7

Neutral Slot

Neutral Lock

Forward

Neutral

Front of

Mower

Reverse

Motion Control Lever Pattern

(Right Side)

FIG - 7

By moving the levers an equal amount forward or back the machine will move in a straight line in that direction. FIG - 7.

Movement of either lever forward will cause the right or left wheel to rotate in a forward direction. To stop movement pull both levers into the neutral position.

To turn right while moving in a forward direction pull the right lever back towards the neutral posi- tion, this will slow the rotation of the right wheel and cause the machine to turn in that direction.

To turn left while moving in a forward direction pull the left lever back towards the neutral position, this will slow the rotation of the left wheel and cause the machine to turn in that direction.

To zero turn pull one lever back beyond neutral while holding the other slightly ahead of neutral. NOTE: The direction of the zero turn will be deter- mined by which lever is pulled back beyond neu- tral. Thus left lever back, left zero turn and oppo- site for right zero turn. Use extra care when us- ing this maneuver the machine can spin very rapidly if one lever is positioned to far ahead of the other.

Blade Switch

Blade engagement switch located on the console is engaged by pulling up on the switch and pushed down to disengage. FIG - 8.

Choke Control

Choke control is located on the console. To choke engine pull knob push to release. FIG - 8.

Throttle Control

Throttle control is located on the console. Used to control engine RPM. FIG - 8. Some models have an intergated choke located on the throttle con- trol. Choke position for these models is maximum forward on the throttle control.

Parking Brake

Parking brake is located on the left side of the machine and directly in front of the fuel tank. Pull the lever back to engage the brake and push lever forward to release the brake.

19

Image 19
Contents Manual no REV. IR 09/13/04 ZMBI48181 ZMKW48191 ZMKW52211 ZMKW52231 ZMKH52231 ZMKW61231Page Contents Introduction IntroductionGood Service Symbols and Decals Symbols and DecalsSafety Instructions Safety InstructionsGeneral Use Keep children away from the work area Do as follows Driving on SlopesChildren Maintenance8011-563 Important Information TransportCustomer Responsibilities Roll Over Protection SystemPresentation PresentationRops Assembly Roll Over Protection System Setup and AdjustmentsTires Engine Oil AdjustmentsSeat Install Control ArmsMower Deck Leveling Park Brake Adjustment For Model ZBMI48181Throttle Lever Tension Motion Control Linkage Adjustment Operating instructions OperationPump Release Key SwitchHour Meter Fuel Shut OffMower blades MaintenanceSafety interlock system Cutter HousingsDeck belt HardwareAir filter Hydraulic systemFuel filter Pump beltLubrication Tire pressureTorque Specifications Maintenance Schedule Problem Trouble ShootingPage Wiring Diagrams Wiring Diagrams

ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, ZMKW61231 specifications

Yazoo/Kees is a well-regarded name in the turf care and landscaping equipment industry, particularly known for its innovative lawn care solutions. Among its impressive lineup, the models ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, and ZMKW61231 stand out for their performance, durability, and advanced technology.

The ZMBI48181 is a robust mower designed for commercial use, featuring a powerful engine and a high-quality deck that delivers exceptional cutting performance. Its intuitive controls and ergonomic design enhance usability, ensuring that operators can work comfortably over extended periods. The ZMKW48191, on the other hand, is a compact model ideal for small to medium-sized properties. Its maneuverability combined with efficient cutting capabilities allows users to navigate tight spaces without sacrificing performance.

Moving on to the ZMKW52211 and ZMKW52231 models, these mowers feature Yazoo/Kees’s patented cutting technology, which ensures a clean cut while minimizing clumping and optimizing grass health. Both models are equipped with high-efficiency engines, offering fuel savings and reduced emissions, aligning with contemporary environmental standards.

The ZMKH52231 model introduces a hybrid option that blends traditional gas-powered engines with electric elements. This unique design not only improves fuel efficiency but also reduces noise levels, making it suitable for residential areas or noise-sensitive environments.

Finally, the ZMKW61231 is perhaps the apex of the lineup. This industrial-grade mower excels in heavy-duty applications with its powerful performance and large cutting deck. It's designed for large properties or commercial landscaping companies needing reliable equipment for extensive grass management.

Across these models, Yazoo/Kees emphasizes durability and ease of maintenance. Constructed from high-quality materials, these mowers are designed to withstand the rigors of outdoor use. Features like easy-access service points and robust frames contribute to their longevity.

In summary, the Yazoo/Kees ZMBI48181, ZMKW48191, ZMKW52211, ZMKW52231, ZMKH52231, and ZMKW61231 represent a collection of cutting-edge lawn care equipment. Each model brings unique attributes suited for various tasks, but they all share a commitment to performance, efficiency, and user comfort. For homeowners and professionals alike, these mowers provide reliable solutions that enhance productivity while delivering superior results on every lawn.