Yazoo/Kees ZEKW48190 manual Hour Meter, Choke Control, Ignition Switch

Page 23

CONTROLS

8. Hour Meter

The hour meter displays the total operating time.

It will flash CHG OIL (Change Oil) at 50 hour intervals. The flash duration is one hour before and one hour after the interval. The CHG OIL icon will come on and shut off automatically. The hour meter can not be manually reset.

8011-759

Hour meter

9. Choke Control

The choke control is used for cold starts in order to provide the engine with a richer fuel mixture.

For cold starts the control should be pulled out.

8011-756

Choke control

10. Ignition Switch

The ignition key is placed on the control panel and is used to start and stop the engine.

IMPORTANT INFORMATION

Do not run the starter for more than five seconds each time. If the engine does not start, wait about 10 seconds before re- trying.

8011-758

Ignition key

English-21

Image 23

Contents Operator’s manual Models Page OPERATOR’S Manual ZE Rider ContentsEnglish-2 Introduction IntroductionManufacturing Number Good ServiceXxxx xxxxxx Symbols and DecalsSymbols and Decals Repair work General Operation Safety InstructionsSafety Instructions English-8 Slope Operation Personal Safety EquipmentChildren Maintenance General Maintenance Risk of sparking Important Information TransportCustomer responsibilities Controls ControlsMotion Control Levers Fuel Shut Off Valve Seat adjustment boltsParking Brake TrackingRefueling Fuses By pass linkageChoke Control Ignition SwitchHour Meter Throttle Control Blade switchCutting height pedal AccessoriesTraining OperationOperation Starting the Engine Before StartingDepress the control for disengaging the mower deck Set the choke control USE Full Throttle When Mowing To remove cables, reverse order To start an engine with a weak batteryRunning Operating on hills Mowing Tips Stopping the Engine Moving by Hand Maintenance Schedule MaintenanceMaintenance Nance Once Maintenance Each Before After 100 Always use protective glasses when handling the battery BatteryTo clean battery and terminals Replacing batteryIgnition System Checking the Safety System Checking the Engines Cooling Air Intake Checking and Adjusting the Throttle CableChecking and Adjusting the Choke Cable Replacing the Air Filter Kawasaki Engine Checking Tire Pressures Replacing the Fuel FilterChecking the Fuel Pump’s Air Filter To replace deck belt Checking the Parking BrakeChecking the V-belts Deck beltDeck belt installation IZT belt removal IZT beltChecking the Blades Belt installationRemove blade bolt by turning counterclockwise Leveling Adjusting the Mower DeckAdjusting Cutting Height To adjust anti-scalp rollers Caster Wheels Cleaning and WashingUse protective glasses when cleaning and washing Removal and installation of caster wheelMower is tracking to the left Tracking adjustmentTo adjust parking brake Mower is tracking to the rightChange transaxles transmission filters LubricationLubrication Lubrication ScheduleFront Wheel Bearings Lubricating the CablesLubricating in Accordance with the Lubrication Schedule Front Wheel MountEngine Oil Changing the Engine Oil Deck outer spindleChecking the Oil Level Transaxle Transmission Fluid Change Changing the Engine Oil FilterExpansion Tank Purging Procedures Problem Cause Trouble Shooting GuideTrouble Shooting Guide Water in the fuel English-61 Winter Storage ServiceStorage StorageWiring diagram Wiring DiagramsZEKW42170/968999295 ZEKW52210/968999296 Technical DataTechnical Data Productivity KAI ZEKW48190/968999506605 lbs Torque Specifications USA requirements Conformity CertificatesConformity Certificates Action Date, mtr reading, stamp, sign Service JournalService Journal Delivery ServiceAfter the First 5-8 Hours Hour Service English-73 English-74 English-75 At Least Once Each Year English-77 English-78 English-79 Page