MAINTENANCE
Belt installation
•Wrap the IZT belt around the IZT pulleys.
•Route the belt around the inside of the idler pulley.
•Now you can wrap the belt around the engine pulley.
•Reattach the spring on the pump idler arm if previously disconnected.
•Reinstall the deck belt onto the electric clutch pulley (see to replace deck belt in this section of the manual).
Checking the Blades
In order to attain the best mowing effect, it is important that the blades are well sharpened and not damaged.
WARNING!
Blades are sharp. Protect your hands with gloves and/or wrap blades with a heavy cloth when handling.
Bent or cracked blades or blades with large nicks should be replaced.
Check the blade mounts.
IMPORTANT INFORMATION
The sharpening of blades should be carried out by an authorized service workshop.
Damaged blades should be replaced when hitting obstacles that result in a breakdown. Let the service workshop decide whether the blade can be repaired/ground or must be replaced.
| 3 | |
| 4 | |
5 | 2 | |
6 | ||
1 | ||
| 7 |
1.Spring loaded idler pulley
2.Fixed idler pulley
3.Engine
4.IZT belt
5.Left drive pulley
6.Right drive pulley
7.Square hole
IZT belt routing
Check the blades