Strong Pools and Spas The Antigua owner manual Pumps, blower or light does not shut off

Page 10

Troubleshooting

*indicates qualified service technician recommended

Display flashes “hot” (OVERHEAT)

This indicates that the heater body is over 112ºF. The system should be shut down in this state and will re-start automatically when the water cools below 112ºF.

Display flashes “HL” (HIGH LIMIT)

This indicates that either the heater or the spa has reached 118ºF or higher. The system will not re-start automatically. To re-start the system, the water temperature must be below 112ºF and the heater key at the topside control must be pressed.

Display flashes “FLO” (FLOW)

This indicates that there is a water flow problem or defective pressure switch.

make sure filters are clean

check that service valves are open

check for obstruction of flow

adjust pressure switch (see pressure switch detail under description and use of controls)

Display flashes “FLC”*

• This indicates that the pressure switch is stuck in the closed position and should be replaced.

Erratic operation at topside panel* •Check for proper connection at J8

Shut off system and restart

Check for debris inside topside panel control housing

Check cable connection at the topside control remove, clean reconnect.

Try new topside control

Replace main board

Pump(s), blower or light does not shut off*

Try new topside control

Replace main board

Circulation pump does not work*

• Check the fuse and power connections.

Light does not work

Press Light to turn the light on/off. The Antigua Spa is equipped with an LED Multi-Color Light. The colors will cycle as you press the light button on and off.

Freeze Protect Over-ride FPO

This function is intended to be used on start-up after a fresh fill if water temp is below 52ºF. The 6 hour dura- tion of the FPO cycle is counted from the time the unit is powered-up and not from the time of its activation.

By pressing the Jets 1 and Light key simultaneously for 10 seconds, the freeze protect feature will be suspend- ed for 6 hours. ( the FPO will be activated) This is to allow the installer of the spa to check for normal operation if the spa is filled with water that is less than the set freeze protect level 52ºF. FPO will appear every 10 sec- onds at the topside control. To manually go back to freeze protect mode, power down the system and re-boot. It is recommended that the system be left on low speed and heating in FPO mode.

8

Image 10
Contents STRONG-9 Table of Contents Introduction Antigua SpaImportant Safety Instructions Do not Operate SPA Without Correct Water LevelInstallation Instructions Spa LocationElectrical General Instructions 120V Antigua Silver Edition Electrical ConnectionsBefore Start UP! Important Union Adjustments Control Panel IdentificationStartup Preparations Motor keypumpTroubleshooting Changing Filter CyclesPumps, blower or light does not shut off Spa Maintenance Essential Chemicals and There USESpa Maintenance Jets, Valves, Injection and Suction Top Air Control ValveWarranties Points on Spa Safety for Strong Spas Spa Owners Safety Precautions / Danger Risk of InjuryRetain this Booklet for Future Reference

The Antigua specifications

Strong Pools and Spas introduces the Antigua, a premier addition to their lineup of luxurious hot tubs that redefines relaxation and comfort. The Antigua is designed to provide the ultimate spa experience in the convenience of your own backyard, combining advanced technology with premium features that cater to your relaxation needs.

One of the standout features of the Antigua is its spacious design, accommodating up to six adults. The ergonomic seating ensures that everyone can find their perfect spot, whether it’s in the deep bucket seats or the more traditional bench seating. This thoughtful layout makes it ideal for family gatherings, social events, or quiet evenings under the stars.

The Antigua is equipped with the innovative Hydro Massage system, which utilizes strategically placed jets to provide a therapeutic massage experience. These adjustable jets can be customized to target sore muscles and improve circulation. The dual pump system ensures powerful water flow, allowing users to enjoy a robust massage experience.

Energy efficiency is another hallmark of the Antigua, thanks to its advanced insulation technology. The spa is designed with a full foam insulation system that minimizes heat loss, making it not only eco-friendly but also cost-effective in terms of energy consumption. This means you can enjoy your hot tub year-round without worrying about excessive utility bills.

The Antigua also features an energy-efficient, ozone water purification system that keeps the water clean and clear with minimal chemical usage. This technology not only enhances the water quality but also creates a more enjoyable and healthier environment for users. With its easy-to-use digital control panel, managing water temperature and jet pressure is seamless and user-friendly.

Aesthetically, the Antigua is designed to impress. It features an elegant cabinet finish and a choice of stylish colors that can complement any outdoor décor. The maintenance-free synthetic wood and durable spa shell ensure that the Antigua remains attractive and withstands the elements over time.

In summary, Strong Pools and Spas' Antigua offers the perfect blend of style, comfort, and advanced technology. With its spacious design, customized hydro massage system, energy-efficient features, and stunning aesthetics, the Antigua is a luxurious retreat that enhances your outdoor living space and provides unparalleled relaxation.