Description | Stiga 8211-0072-80 instruction

ENGLISH

10.2Engine casing (2:U)

In order to access the fuel cock, battery and engine, the machine has an engine casing that can be opened. The engine cas- ing is locked with a rubber strap.

The engine casing is opened as follows:

1.Undo the rubber strap (2:V) at the front edge of the casing.

2.Carefully lift the engine casing back.

Close in the reverse order.

The machine may not be operated un- less the engine casing is closed and locked. Risk of burns and crushing in- juries.

10.3Battery

See “14.8 Battery”.

10.4Seat (fig. 4)

1.Remove the following components from the seat bracket:

•4 Nuts (for transport locking, not used).

•4 Screws.

•4 Shoulder washers.

2.Position the seat over the mounting in the seat bracket.

3.Install the shoulder washers on the screws.

4.Insert the screws with the attached shoulder washers through the slots in the seat bracket and the holes in the seat plate. Screw the seat into place.

Tightening torque: 9±1.7 Nm.

If the screws are tightened more than 9±1.7 Nm, the seat will be damaged.

5.Check that the seat moves easily in the slots in the bracket.

The seat can be folded. If the machine is parked outside when it is raining, fold the seat forward to protect the seat cushion from getting wet.

10.5Steering wheel

In order to minimise the axial play in the steering column, the shim washers (5:B) and/or (5:C) must be installed on the steering column between the steering column jacket and the bracket as follows.

1.Install the steering column jacket on the steer- ing column and secure by knocking in the ten- sion pin (5:A) approximately 1/3 of its length.

2.Pull the steering column jacket and the steering column up.

3.From the outside, check whether no washers, the 0.5 mm washer, the 1.0 mm washer or both washers can be inserted into the gap. The wash- er/washers must not be forced in, as there must be a little axial play.

4.Pull out the cotter pin and dismantle the steering wheel jacket.

5.Install the washer/washers in accordance with point 3 above.

6.Install the steering column jacket on the steer- ing column and secure by knocking in the ten- sion pin fully. Use a counterhold.

10.6Towing plate

Install the towing plate (6:I) at the rear of the ma- chine. Use the screws and the nuts (6:J, H). Tightening torque: 22 Nm.

10.7Deck mounts

This only describes installation on the right-hand axle. Same procedure must be carried out on the left-hand axle.

1.Lubricate the axle ends and the deck mount’s bearing surface with oil before installation.

2.Install the deck mounts to the machine accord- ing to fig. 7.

3.Install the locking pin (7:K) in the hole in the axle.

10.8Tyre pressure

Check the air pressure in the tyres. Correct air pressure:

Front: 0.6 bar (9 psi)

Rear: 0.4 bar (6 psi)

10.9Accessories

For the installation of accessories, see separate in- stallation guide supplied with each accessory. Note: The cutting deck is regarded as an accessory here.

11DESCRIPTION

11.1Drive

The machine is rear wheel drive.

The rear axle is equipped with a hydrostatic trans- mission with infinitely variable forward and re- verse gear ratios.

The rear axle is also equipped with a differential to facilitate turning.

Front mounted tools are driven by drive belts.

11.2 Steering

The machine is articulated. This means that the chassis is divided into a front and a rear section, which can be turned in relation to each other.

The articulated steering means that the machine can turn around trees and other obstacles with an extremely small turning radius.

8211-0072-80 specifications

The Stiga 8211-0072-80 is a cutting-edge lawnmower designed for homeowners who seek both efficiency and comfort in their gardening tasks. This model combines robust engineering with innovative technologies, making it a top choice for those serious about lawn care.

One of the standout features of the Stiga 8211-0072-80 is its powerful engine. Equipped with a reliable four-stroke engine, it delivers excellent performance and longevity. The engine is designed for easy starting and low emissions, promoting a more environmentally friendly operation. The mower’s performance is complemented by a durable cutting deck, which allows for a wide cutting path, reducing the time needed to achieve a well-manicured lawn.

The cutting height adjustment system is another notable characteristic of this lawnmower. Users can easily modify the cutting height to their preferred length with a simple lever adjustment. This versatility means that the mower can adapt to varying grass types and seasonal growth, promoting healthier lawn conditions.

In addition to its performance features, the Stiga 8211-0072-80 incorporates user-friendly technologies that elevate the mowing experience. Its ergonomic handle ensures a comfortable grip, thereby reducing user fatigue during extended mowing sessions. The mower is lightweight, enhancing maneuverability, and allowing users to navigate around obstacles effortlessly.

Safety is also a key focus in the design of the Stiga 8211-0072-80. It comes equipped with a reliable safety brake system, which stops the blades almost instantaneously when released. This feature ensures that users can operate the mower with peace of mind, knowing that safety measures are in place.

Another advantage of the Stiga 8211-0072-80 is its innovative grass collection system. The model features an ample grass collector that minimizes the need for frequent emptying, allowing users to cover larger areas without interruption. This is especially beneficial for those with expansive lawns, as it enhances overall efficiency.

Furthermore, the Stiga mower is built with durability in mind. The robust materials used in its construction ensure that it can withstand the rigors of regular use while maintaining its aesthetics and functionality.

In summary, the Stiga 8211-0072-80 is a versatile and user-friendly lawnmower, ideal for homeowners seeking a reliable solution for their lawn care needs. With its powerful engine, exceptional cutting capabilities, ergonomic design, and safety features, it stands out as an excellent investment for efficient lawn maintenance.