Maintenance and Storage | Stiga 8211-0072-80 specs

ENENGLISH

b. Putting the gear in neutral and activating the parking brake.

c. Stopping the engine and removing the key.

•Only use accessories that are approved by the machine’s manufacturer.

•The machine may not be used without accessories/tools being installed in the machine’s tool mounts. Driving without accessories can have a negative effect on the stability of the machine.

•Take care when using grass collectors and other accessories. These can alter the machine’s stability. Particularly on slopes.

•Disengage the drive to the accessories, shut off the engine and disconnect the spark plug cable or remove the starter key:

a.To remove sticks and rubbish or when the discharge has become clogged.

b.To check, clean or service the machine.

c.To check whether damage has occurred and to carry out any repairs before starting and using the machine again after a collision with a foreign object.

d.To check the machine if it begins to vibrate excessively. (Check immediately).

•Disengage the drive to accessories during transport or when the machine is not in use.

•Shut off the engine and disconnect the drive to the accessories:

a.Before filling with petrol.

b.Before removing the grass collector.

c.Before adjusting the height setting, assuming this cannot be done from the driver’s position.

•Reduce the acceleration when the engine is to be stopped, and if the engine is equipped with a fuel shut-off valve, this should be switched off when the work is finished.

•Take care with multiple blade decks as one rotating blade can cause other blades to rotate.

•The machine, equipped with original accessories, must not be driven in any direction on slopes with a gradient greater than 10º.

•The cutting deck’s original blade(s) may not be replaced with non-original devices intended for e.g. moss scarification. If such devices are used, the guarantee will cease to be valid. There is also a risk of serious injury or damage to people or property.

•Take care when unloading and loading the machine onto a trailer or lorry.

2.4 MAINTENANCE AND STORAGE

•Tighten all nuts and screws so that the machine is in safe working condition.

•At regular intervals check that the cutting deck’s blade screw(s) are properly tightened.

•Regularly check the operation of the brakes. It is important to maintain and repair the brakes if necessary.

•Never store the machine with petrol in the tank in buildings where the fumes can come into contact with open flames or sparks.

•Allow the engine to cool before placing the machine in a store.

•To reduce the risk of fire, keep the engine, silencer, battery and petrol tank free from grass, leaves and surplus oil.

•Check frequently whether there is any wear or damage to the grass collector.

•For the sake of safety, replace worn or damaged parts.

•Always use genuine spare parts. Non-genuine spare parts can entail a risk of injury, even if they fit the machine.

•Replace damaged warning and instruction stickers.

•If there is no mechanical lock for the transport position, the cutting deck must be lowered when parked, stored or when the machine is left unsupervised.

•If the petrol tank is to be emptied, this must take place outdoors.

•Store the machine so that children cannot get to it.

•The battery contains acid. In the event of mechanical damage or overcharging, acid can leak out.

•Never overcharge the battery. Overcharging can cause the battery to explode, throwing the acid in all directions.

•If acid comes into contact with the eyes or skin, this can cause serious injuries. If any part of the body has come into contact with acid, rinse immediately with copious amounts of water and seek medical assistance as soon as possible.

•Fumes from acid that are inhaled cause damage to mucous membranes and other internal organs. Seek medical assistance if acid fumes have been inhaled.

•Acid causes serious damage to tools, clothes and other material. Rinse away spilled acid immediately with water.

•Do not short circuit the battery’s terminals. Sparks occur which can result in fire. Do not wear metal jewellery which can come into contact with the battery terminals.

•In the event of damage to the battery casing, cover, terminals or interference to the strip

8211-0072-80 specifications

The Stiga 8211-0072-80 is a cutting-edge lawnmower designed for homeowners who seek both efficiency and comfort in their gardening tasks. This model combines robust engineering with innovative technologies, making it a top choice for those serious about lawn care.

One of the standout features of the Stiga 8211-0072-80 is its powerful engine. Equipped with a reliable four-stroke engine, it delivers excellent performance and longevity. The engine is designed for easy starting and low emissions, promoting a more environmentally friendly operation. The mower’s performance is complemented by a durable cutting deck, which allows for a wide cutting path, reducing the time needed to achieve a well-manicured lawn.

The cutting height adjustment system is another notable characteristic of this lawnmower. Users can easily modify the cutting height to their preferred length with a simple lever adjustment. This versatility means that the mower can adapt to varying grass types and seasonal growth, promoting healthier lawn conditions.

In addition to its performance features, the Stiga 8211-0072-80 incorporates user-friendly technologies that elevate the mowing experience. Its ergonomic handle ensures a comfortable grip, thereby reducing user fatigue during extended mowing sessions. The mower is lightweight, enhancing maneuverability, and allowing users to navigate around obstacles effortlessly.

Safety is also a key focus in the design of the Stiga 8211-0072-80. It comes equipped with a reliable safety brake system, which stops the blades almost instantaneously when released. This feature ensures that users can operate the mower with peace of mind, knowing that safety measures are in place.

Another advantage of the Stiga 8211-0072-80 is its innovative grass collection system. The model features an ample grass collector that minimizes the need for frequent emptying, allowing users to cover larger areas without interruption. This is especially beneficial for those with expansive lawns, as it enhances overall efficiency.

Furthermore, the Stiga mower is built with durability in mind. The robust materials used in its construction ensure that it can withstand the rigors of regular use while maintaining its aesthetics and functionality.

In summary, the Stiga 8211-0072-80 is a versatile and user-friendly lawnmower, ideal for homeowners seeking a reliable solution for their lawn care needs. With its powerful engine, exceptional cutting capabilities, ergonomic design, and safety features, it stands out as an excellent investment for efficient lawn maintenance.