Areas of USE | Stiga 8211-0072-80 specs

ENGLISH

4.Start position – the electric start motor is activated when the key is turned to the spring-loaded start position. Once the en- gine has started, let the key return to oper- ating position 3.

11.4.8Power take-off (4,5:K)

The power take-off must never be engaged when the front-mounted implement is in transport position. This will destroy the belt transmission.

A lever for engaging and disengaging the power take-off for operating front-mounted accessories. Two positions:

1.Lever in forward position – power take- off disengaged.

2.Lever in backward position - power take-off engaged.

11.4.9Hour meter (2:P)

Indicates the number of working hours. Only works when the engine is running.

11.4.10Clutch release lever

A lever for disengaging the variable transmission. 2WD is equipped with a lever, connected to the rear axle. See (6:R).

The disengagement lever must never be between the outer and inner positions. This overheats and damages the trans- mission.

The levers enable the machine to be moved by hand without the help of the engine. Two positions:

1.Lever in the inner position – transmission engaged for normal operation.

2.Lever in the outer position – transmission disengaged. The machine can be moved by hand.

The machine may not be towed over long distances or at high speeds. The transmission could be dam- aged.

The machine must not be operated with the forward most lever in the outer po- sition. Risk of damage and oil leakage in the front axle.

11.4.11Seat (8:T)

The seat can be folded and adjusted front- rear. The seat can be adjusted as follows:

1.Move the control lever (8:S) upwards.

2.Set the seat to the desired position.

3.Release the control lever (8:S) to lock the seat.

The seat is equipped with a safety switch that is connected to the machine’s safety system. This means that certain dangerous activities are not pos- sible when there is nobody sitting on the seat. Also see 13.4.2.

11.4.12Engine casing (2:U)

In order to access the fuel cock, battery and engine, the machine has an engine casing that can be opened. The engine cas- ing is locked with a rubber strap.

The engine casing is opened as follows:

1.Undo the rubber strap (2:V) at the front edge of the casing.

2.Carefully lift the engine casing back.

Close in the reverse order.

The machine may not be operated un- less the engine casing is closed and locked. Risk of burns and crushing in- juries.

12 AREAS OF USE

The machine may only be used for the following tasks using the genuine STIGA accessories stated.

Work	Accessories, STIGA genuine
Mowing	Using mowing decks:
	95 C, 105 C and with flail mow-
	er.
Sweeping	Using brush unit or collector
	brush unit. The use of a dust
	guard is recommended with the
	first option.
Snow clearance	Using snow blade or snow
	thrower Snow chains and frame
	weights are recommended.
Grass clipping and	Using towed collector 30" or
leaf collection	42". Pro Cart.
Grass and leaf	Using dump cart Standard, Maxi
transport	or Combi.
Sand spreading	Using sand spreader. Can also
	be used for spreading salt. Snow
	chains and frame weights are
	recommended.
Weeding on gravel	Using front-mounted hoe.
paths
Lawn edge trim-	Using edge trimmer.
ming
Moss scarification	Using moss scarifier.

The maximum vertical load on the towing hitch must not exceed 100 N.

The maximum over-run load on the towing hitch from towed accessories must not exceed 500 N.

8211-0072-80 specifications

The Stiga 8211-0072-80 is a cutting-edge lawnmower designed for homeowners who seek both efficiency and comfort in their gardening tasks. This model combines robust engineering with innovative technologies, making it a top choice for those serious about lawn care.

One of the standout features of the Stiga 8211-0072-80 is its powerful engine. Equipped with a reliable four-stroke engine, it delivers excellent performance and longevity. The engine is designed for easy starting and low emissions, promoting a more environmentally friendly operation. The mower’s performance is complemented by a durable cutting deck, which allows for a wide cutting path, reducing the time needed to achieve a well-manicured lawn.

The cutting height adjustment system is another notable characteristic of this lawnmower. Users can easily modify the cutting height to their preferred length with a simple lever adjustment. This versatility means that the mower can adapt to varying grass types and seasonal growth, promoting healthier lawn conditions.

In addition to its performance features, the Stiga 8211-0072-80 incorporates user-friendly technologies that elevate the mowing experience. Its ergonomic handle ensures a comfortable grip, thereby reducing user fatigue during extended mowing sessions. The mower is lightweight, enhancing maneuverability, and allowing users to navigate around obstacles effortlessly.

Safety is also a key focus in the design of the Stiga 8211-0072-80. It comes equipped with a reliable safety brake system, which stops the blades almost instantaneously when released. This feature ensures that users can operate the mower with peace of mind, knowing that safety measures are in place.

Another advantage of the Stiga 8211-0072-80 is its innovative grass collection system. The model features an ample grass collector that minimizes the need for frequent emptying, allowing users to cover larger areas without interruption. This is especially beneficial for those with expansive lawns, as it enhances overall efficiency.

Furthermore, the Stiga mower is built with durability in mind. The robust materials used in its construction ensure that it can withstand the rigors of regular use while maintaining its aesthetics and functionality.

In summary, the Stiga 8211-0072-80 is a versatile and user-friendly lawnmower, ideal for homeowners seeking a reliable solution for their lawn care needs. With its powerful engine, exceptional cutting capabilities, ergonomic design, and safety features, it stands out as an excellent investment for efficient lawn maintenance.