Stiga 8211-0072-80 manual Maintenance

Page 15

ENGLISH

13.5 Start

1.Open the fuel cock. See 16.

2.Check that the spark plug cable(s) is/are in- stalled on the spark plug(s).

3.Check to make sure that the power take-off is disengaged.

4.Do not keep your foot on the drive pedal.

5.Put the throttle control at full throttle.

Starting cold engine – pull the choke control out fully.

Starting warm engine – the choke control should be pressed in.

6.Depress the clutch-brake pedal fully.

7.Turn the ignition key and start the engine.

8Once the engine has started, push the choke control in gradually if it has been used.

9.When starting from cold, do not make the ma- chine work under load immediately, but let the engine run for a few minutes first. This will al- low the oil to warm up.

When the machine is in operation, full throttle should always be used.

13.6 Operating tips

Always check that there is the correct volume of oil in the engine. This is particularly important when operating on slopes. See “13.2”.

Be careful when driving on slopes. No sudden starting or stopping when driv- ing up or down a slope. Never drive across a slope. Move from the top down or from the bottom to the top.

The machine may not be driven on slopes greater than 10º in any direction.

Reduce the speed on slopes and when making sharp turns in order to retain control and reduce the risk of tipping over.

Do not turn the steering wheel to full lock when driving in top gear and at full throttle. The machine can easily topple over.

Keep hands and fingers well away from articulated steering joint and seat bracket. Risk of crushing injuries. Nev- er drive with the engine casing open.

13.7 Stop

Disengage the power take-off. Apply the parking brake.

Allow the engine to idle 1-2 mins. Stop the engine by turning off the ignition key.

Shut off the petrol cock. This is particularly impor- tant if the machine is to be transported on a trailer for example.

If the machine is left unattended, re- move the spark plug cable(s) and re- move the ignition key.

The engine may be very warm immedi- ately after it is shut off. Do not touch the silencer, cylinder or cooling fins. This can cause burn injuries.

13.8 Cleaning

To reduce the risk of fire, keep the en- gine, silencer, battery and fuel tank free from grass, leaves and oil.

To reduce the risk of fire, regularly check the machine for oil and/or fuel leakage.

Clean the machine after each use. The following instructions apply for cleaning:

When washing the machine with water under high pressure, do not point the jet directly at axle seals, electrical components or hydraulic valves.

Do not spray water directly at the engine.

Clean the engine with a brush and/or com- pressed air.

Clean the engine’s cooling air intake (14:W).

14 MAINTENANCE

14.1Service programme

In order to keep the machine in good condition as regards reliability and operational safety as well as from an environmental perspective, STIGA’s Ser- vice programme should be followed.

The contents of this programme can be found in the attached service log.

Basic service must always be carried out by an au- thorised workshop.

First service and intermediate service should be carried out by an authorised workshop, but can also be carried out by the user. The content of this can be found in the service log and the actions are described under “13.4” as well as below. Servicing carried out at an authorised workshop guarantees professional work using genuine spare parts.

At each basic service and intermediate service car- ried out at an authorised workshop, the service log is stamped. A service log presenting these services is a valuable document that improves the ma- chine’s second-hand value.

14.2 Preparation

All service and all maintenance must be carried out on a stationary machine with the engine switched off.

Prevent the machine from rolling by al- ways applying the parking brake.

29

Image 15
Contents Stiga Park Unlimited, President Ranger, Comfort Page Max Page Headings Safety InstructionsGeneral ReferencesEnglish Maintenance and Storage Product Identity ServiceStorage Purchase TermsInsure Your RIDE-ON Lawnmower Assembly10.1Assembly components EnvironmentDescription 11.4Controls Safety systemAreas of USE Filling with petrol Safety checksStarting and Operation 13.3Level check, transmission oilMaintenance 14.5Fuel filter BatteryTyre pressure Changing engine oilAir filter, engine 14.10Spark plug14.11Air intake 14.13Fuses Fault FusePatent Design REGIS- Tration 14.12Lubrication

8211-0072-80 specifications

The Stiga 8211-0072-80 is a cutting-edge lawnmower designed for homeowners who seek both efficiency and comfort in their gardening tasks. This model combines robust engineering with innovative technologies, making it a top choice for those serious about lawn care.

One of the standout features of the Stiga 8211-0072-80 is its powerful engine. Equipped with a reliable four-stroke engine, it delivers excellent performance and longevity. The engine is designed for easy starting and low emissions, promoting a more environmentally friendly operation. The mower’s performance is complemented by a durable cutting deck, which allows for a wide cutting path, reducing the time needed to achieve a well-manicured lawn.

The cutting height adjustment system is another notable characteristic of this lawnmower. Users can easily modify the cutting height to their preferred length with a simple lever adjustment. This versatility means that the mower can adapt to varying grass types and seasonal growth, promoting healthier lawn conditions.

In addition to its performance features, the Stiga 8211-0072-80 incorporates user-friendly technologies that elevate the mowing experience. Its ergonomic handle ensures a comfortable grip, thereby reducing user fatigue during extended mowing sessions. The mower is lightweight, enhancing maneuverability, and allowing users to navigate around obstacles effortlessly.

Safety is also a key focus in the design of the Stiga 8211-0072-80. It comes equipped with a reliable safety brake system, which stops the blades almost instantaneously when released. This feature ensures that users can operate the mower with peace of mind, knowing that safety measures are in place.

Another advantage of the Stiga 8211-0072-80 is its innovative grass collection system. The model features an ample grass collector that minimizes the need for frequent emptying, allowing users to cover larger areas without interruption. This is especially beneficial for those with expansive lawns, as it enhances overall efficiency.

Furthermore, the Stiga mower is built with durability in mind. The robust materials used in its construction ensure that it can withstand the rigors of regular use while maintaining its aesthetics and functionality.

In summary, the Stiga 8211-0072-80 is a versatile and user-friendly lawnmower, ideal for homeowners seeking a reliable solution for their lawn care needs. With its powerful engine, exceptional cutting capabilities, ergonomic design, and safety features, it stands out as an excellent investment for efficient lawn maintenance.