Service, Purchase Terms | Stiga 50R-B, 50-G, 50-H, 40-G, 40R-G

GB	ENGLISH

7.4 Changing the oil

Change the oil the first time after 2 hours of oper- ation, and subsequently every 25 hours of opera- tion or at least once a season. Change oil when the engine is warm.

The engine oil may be very hot if it is drained off directly after the engine is shut off. So allow the engine to cool a few minutes before draining the oil.

1.Unscrew the cap for oil filling/oil draining. See “4.10”.

2.Place a container on the floor.

3.Tilt the machine so that the hole is above the container. See fig. 8.

3.Let the oil run out into the container.

5.Fill with new oil: See “5.2”.

7.5 Side adjustment

If the handle’s side adjustment (1:P) does not lock the handle satisfactorily it can be adjusted as fol- lows:

1.Remove the handle’s support by carrying out the procedure in “3.2” reverse order.

2.Adjust the lock on the nut in fig. 7. Tightening secures the lock better. Slackening off makes the lock less secure.

3.Reinstall the handle according to the procedure in “3.3”.

7.6 Cleaning

Never use high-pressure washing equip- ment when cleaning. This can cause wa- ter to penetrate between the seals and cause machine damage.

First brush off all dirt. Then wipe down the rotary cultivator using a damp cloth. The underside can be washed with water.

7.7 Fault-tracing

Fault: Difficult to start

Cause: The fuel is too old.

Action: Drain the tank and fill with fresh petrol.

Cause: Sparkplug fault.

Action: Replace spark plug.

Fault: Engine runs unevenly

Cause: Contaminated fuel.

Action: Clean the petrol tank and carburettor.

Cause: Sparkplug fault.

Action: Replace spark plug.

Fault: Weak engine, does not run at full throttle

Cause: Blocked air filter

Corrective action: Clean or replace the air filter.

Fault: Stops during operation

Cause: No fuel.

Action: Fill with petrol

8 SERVICE

Authorised service stations carry out repairs and servicing. They always use genuine spare parts.

Under no circumstances may parts oth- er than genuine spare parts be used. This is a requirement stipulated by the Testing Authority. The machine is ap- proved and tested with these parts.

If the machine requires servicing, repair or maintenance that entails dismantling of the cover, this must be performed by an authorised service station.

The manufacturer reserves the right to make alter- ations to the product without prior notification.

9 PURCHASE TERMS

A full warranty is issued against manufacturing and material defects. The user must carefully fol- low the instructions given in the enclosed docu- mentation.

Warranty period

According to relevant laws.

Exceptions

The warranty does not cover damage due to:

-Neglect by users to acquaint themselves with accompanying documentation

-Carelessness

-Incorrect and non-permitted use or assembly

-The use of non-genuine spare parts

-The use of accessories not supplied or approved Neither does the warranty cover:

-Wear parts

-Normal wear

The purchaser is covered the national laws of each country. The rights to which the purchaser is enti- tled with the support of these laws are not restrict- ed by this warranty.

GGP reserves the right to make alterations to the product without prior notification.

40R-G, 40-G, 50-H, 50-G, 50R-B specifications

Stiga is a renowned name in the world of outdoor and garden equipment, particularly known for its high-quality lawn mowers and garden tractors. Among their impressive lineup, the Stiga 50-H, 40-G, 50R-B, 50-G, and 40R-G models stand out due to their advanced features and cutting-edge technologies. Each model is designed to cater to various lawn care needs while ensuring efficiency and ease of use.

The Stiga 50-H is equipped with a robust 50 cm cutting deck that ensures a wide cutting path, ideal for larger gardens. With a powerful engine, this model offers excellent performance, allowing users to tackle tough grass quickly and effectively. It features an adjustable cutting height, enabling users to set the grass length between various options for a precise cut.

Similarly, the Stiga 40-G model is designed for versatility with a 40 cm cutting deck. Ideal for medium-sized gardens, it combines maneuverability with performance. Featuring a lightweight design, the 40-G is easy to control and transport. Additionally, this model offers efficiency through its eco-friendly engine, minimizing emissions while maximizing power.

Transitioning to the Stiga 50R-B, this model is engineered for those seeking a reliable solution for larger mowing tasks. It boasts a rear-discharge cutting system that excels in distributing grass clippings evenly across the lawn. This not only saves time but also contributes to a healthier lawn by returning nutrients back to the soil.

The Stiga 50-G model is another powerhouse, similar to the 50-H in cutting width but distinguished by its innovative gear drive system, which ensures smooth operation on varying terrains. Its rugged construction guarantees durability, making it suitable for any condition.

Lastly, the Stiga 40R-G is a versatile model designed with the user in mind. It features a collapsible handle for easy storage and transport. With a focus on providing an effortless mowing experience, it integrates user-friendly controls and advanced safety features, making it accessible for both novice and experienced users alike.

In conclusion, the Stiga 50-H, 40-G, 50R-B, 50-G, and 40R-G models each bring unique attributes and cutting-edge technologies to the table. From their powerful engines and adjustable cutting heights to user-centric designs and eco-friendly features, these mowers are perfect for anyone looking to maintain a pristine lawn. Whether handling routine maintenance or tackling larger mowing tasks, Stiga delivers reliability and performance in every model.

ENGLISH