Description | Stiga 50-G, 50R-B, 50-H, 40-G, 40R-G instruction

GB	ENGLISH

3.4 Throttle control

Install the throttle on the left handle according to fig. 6.

3.5 Throttle cable

1.Install the throttle cable on the engine if not al- ready installed. See the engine supplier’s man- ual.

2.Pull up the cable under the support’s (4:U) up- per section over the screw (5:C).

3.Install the cable in the throttle. See fig. 7.

4.Install the electric cable to the stop control which is located on top of the throttle.

3.6 Cable for reverse control

Only applies to 40R-G and 50R-B.

The cable is marked R.

1.Pull up the cable under the support’s (4:U) up- per section over the screw (5:C).

2.Hook the cable in the reverse control (1:A) and insert the cable in the gap in the cable housing’s mounting on the left handle.

3.Adjust the cable sleeve if necessary.

4.2 Drive control (1:B)

The control is used to start the rotor for forward motion when the engine is running.

The reverse control (1:A) and drive control must never be activated at the same time.

Control in idle mode (down) – No drive.

Control pulled in – Forward operation.

4.3 Throttle and stop (1:C)

The control determines the engine’s rpm and has start and stop positions.

The throttle control determines the speed and is used to stop the engine.

Stop: Control in the rear position.

Idle: Control 1 cm in front of rear position.

Full throttle and start: Control in the front position.

4.4 Handle (1:D)

The handle has two handgrips that are used to op- erate the machine over the area to be cultivated.

3.7 Drive cable

1.Pull up the cable under the support’s (4:U) up- per section over the screw (5:C).

2.Hook the cable in the drive control (1:B) and in- sert the cable in the gap in the cable housing’s mounting on the left handle.

3.Adjust the cable sleeve if necessary.

4 DESCRIPTION

The rotary cultivator is driven by a four-stroke en- gine and is intended for soil cultivation in private gardens. The most important parts and controls of the rotary cultivator are described below.

4.1 Reverse control (1:A)

Only applies to 40R-G and 50R-B.

The control is used to start the rotor for reverse when the engine is running.

The reverse control and drive control (1:B) must never be activated at the same time.

Control in idle mode (forward) – No drive.

Control moved backwards – The machine reverses.

4.5 Fuel cap

Unscrew the fuel cap to fill with petrol. The fuel cap must always be closed during operation.

The fuel cap is shown according to the table below:

Machine	Figure:Position
40-G	The engine manual
40R-G	The engine manual
50-G	The engine manual
50-H	The engine manual
50R-B	1:O

4.6 Protective grille (1:H)

The protective grille must always be installed dur- ing operation. There are surfaces that become ex- tremely hot under the protective grille that risk causing personal injury if touched.

4.7 Cover (1:F)

The cover protects cables and the handle adjust- ment.

4.8 Handle side adjustment (1:P)

Only applies to 50-G, 50-H and 50R-B.

Release the lever and set the handle to a comfort- able angle.

Then relock using the lever.

40R-G, 40-G, 50-H, 50-G, 50R-B specifications

Stiga is a renowned name in the world of outdoor and garden equipment, particularly known for its high-quality lawn mowers and garden tractors. Among their impressive lineup, the Stiga 50-H, 40-G, 50R-B, 50-G, and 40R-G models stand out due to their advanced features and cutting-edge technologies. Each model is designed to cater to various lawn care needs while ensuring efficiency and ease of use.

The Stiga 50-H is equipped with a robust 50 cm cutting deck that ensures a wide cutting path, ideal for larger gardens. With a powerful engine, this model offers excellent performance, allowing users to tackle tough grass quickly and effectively. It features an adjustable cutting height, enabling users to set the grass length between various options for a precise cut.

Similarly, the Stiga 40-G model is designed for versatility with a 40 cm cutting deck. Ideal for medium-sized gardens, it combines maneuverability with performance. Featuring a lightweight design, the 40-G is easy to control and transport. Additionally, this model offers efficiency through its eco-friendly engine, minimizing emissions while maximizing power.

Transitioning to the Stiga 50R-B, this model is engineered for those seeking a reliable solution for larger mowing tasks. It boasts a rear-discharge cutting system that excels in distributing grass clippings evenly across the lawn. This not only saves time but also contributes to a healthier lawn by returning nutrients back to the soil.

The Stiga 50-G model is another powerhouse, similar to the 50-H in cutting width but distinguished by its innovative gear drive system, which ensures smooth operation on varying terrains. Its rugged construction guarantees durability, making it suitable for any condition.

Lastly, the Stiga 40R-G is a versatile model designed with the user in mind. It features a collapsible handle for easy storage and transport. With a focus on providing an effortless mowing experience, it integrates user-friendly controls and advanced safety features, making it accessible for both novice and experienced users alike.

In conclusion, the Stiga 50-H, 40-G, 50R-B, 50-G, and 40R-G models each bring unique attributes and cutting-edge technologies to the table. From their powerful engines and adjustable cutting heights to user-centric designs and eco-friendly features, these mowers are perfect for anyone looking to maintain a pristine lawn. Whether handling routine maintenance or tackling larger mowing tasks, Stiga delivers reliability and performance in every model.

ENGLISH