Assembly, Auxiliary wheel, Handle’s support

ENGLISH	GB

•The carbon monoxide in the engine's exhaust fumes is poisonous and can cause death.

•Wear tightly fitting clothes and heavy-duty shoes which completely cover the feet.

•The tank should only be half full when operat- ing on slopes. Petrol can leak out.

•The engine must be stopped in the following circumstances:

•When the machine is left unattended

•Before the machine is filled up with petrol

•Always make sure you have a good footing, es- pecially on slopes.

•Check that no one is in front of you or beside you when starting the blades. Keep a steady grip on the steering. The machine will lift when the rotors are started. Use extra caution when backing.

•Always keep at a safe distance to the rotors when working.

•Holding the steering correctly ensures a safe distance.

•No person must come closer than 20 m to the machine when working on slopes. The user must hold the steering firmly with both hands all the time.

•Working on stony or hard ground demands ex- tra attention from the operator. The machine be- comes more unstable.

•Never touch the engine when operating the ma- chine, or just afterwards. Risk for burn injuries.

2.4 AFTER OPERATING

•Allow the engine to cool before putting the ma- chine in a storeroom. Fire risk!

•Remove dirt and foreign material before putting the machine in a storeroom. The area round the petrol tank and muffler must be kept clean from leaves, oil, petrol or other foreign materials.

Fire risk!

•If the petrol tank is to be emptied, do this out- doors and when the engine is cold. Fire risk!

•The machine should be stored in a dry place. The machine must not stored with fuel in the tank in rooms where there are naked flames, sparks or other strong sources of heat.

2.5 MAINTENANCE

•Carry out maintenance regularly. All nuts and bolts should always be tight.

•Only use genuine spare parts which are in good condition. Spare parts must not be repaired. They must be replaced if they are defective. Poor quality spare parts can lead to personal in- jury. If the muffler is damaged it must be re- placed.

•The engine must be stopped and the spark plug lead disconnected in the following circumstanc- es:

When adjusting the rotors.

When the machine is to be cleaned or repaired. When checking after a collision with a solid hard object. Carry out the necessary repairs be- fore continuing to work.

If the machine begins to vibrate abnormally. Carry out the necessary repairs before continu- ing to work.

•Wear protective gloves when working with the rotors.

3ASSEMBLY

3.1Auxiliary wheel

1.Install the auxiliary wheel (4:T) in its holder and lock onto the support (4:Q) with the knob (4:R).

2.Install the unit on the machine and lock at a suit- able height using the knob (4:S).

3.2 Handle’s support

Install the handle’s support (4:U) on the machine. Use the 4 screws, nuts and washers as illustrated in fig. 4.

3.3 Handle

1.Slide up the reinforcement plate (4:V) from un- derneath in the handle’s stay so that the holes correspond.

2.Install the right and left handle (5:A and 5:B) with components below:

•The through screw (5:C) with two washers and nuts. Check that the screw also goes through the reinforcement plate (4:V).

•The knob (5:D) with screw (5:E) and two washers. Check that the screw also goes through the reinforcement plate (4:V).

3.Install the handle’s intermediate section (5:G) with two screws and two nuts.

4.Install the cover (1:F) with 4 screws from un- derneath.

40R-G, 40-G, 50-H, 50-G, 50R-B specifications

Stiga is a renowned name in the world of outdoor and garden equipment, particularly known for its high-quality lawn mowers and garden tractors. Among their impressive lineup, the Stiga 50-H, 40-G, 50R-B, 50-G, and 40R-G models stand out due to their advanced features and cutting-edge technologies. Each model is designed to cater to various lawn care needs while ensuring efficiency and ease of use.

The Stiga 50-H is equipped with a robust 50 cm cutting deck that ensures a wide cutting path, ideal for larger gardens. With a powerful engine, this model offers excellent performance, allowing users to tackle tough grass quickly and effectively. It features an adjustable cutting height, enabling users to set the grass length between various options for a precise cut.

Similarly, the Stiga 40-G model is designed for versatility with a 40 cm cutting deck. Ideal for medium-sized gardens, it combines maneuverability with performance. Featuring a lightweight design, the 40-G is easy to control and transport. Additionally, this model offers efficiency through its eco-friendly engine, minimizing emissions while maximizing power.

Transitioning to the Stiga 50R-B, this model is engineered for those seeking a reliable solution for larger mowing tasks. It boasts a rear-discharge cutting system that excels in distributing grass clippings evenly across the lawn. This not only saves time but also contributes to a healthier lawn by returning nutrients back to the soil.

The Stiga 50-G model is another powerhouse, similar to the 50-H in cutting width but distinguished by its innovative gear drive system, which ensures smooth operation on varying terrains. Its rugged construction guarantees durability, making it suitable for any condition.

Lastly, the Stiga 40R-G is a versatile model designed with the user in mind. It features a collapsible handle for easy storage and transport. With a focus on providing an effortless mowing experience, it integrates user-friendly controls and advanced safety features, making it accessible for both novice and experienced users alike.

In conclusion, the Stiga 50-H, 40-G, 50R-B, 50-G, and 40R-G models each bring unique attributes and cutting-edge technologies to the table. From their powerful engines and adjustable cutting heights to user-centric designs and eco-friendly features, these mowers are perfect for anyone looking to maintain a pristine lawn. Whether handling routine maintenance or tackling larger mowing tasks, Stiga delivers reliability and performance in every model.

ENGLISH