Stiga 40R-G, 50R-B, 50-G, 50-H Storage, Maintenance, Periodic maintenance, Air filter, Spark plug

Page 9

ENGLISH

6 STORAGE

Store the rotary cultivator in a dry place. Also see section “Safety instructions”.

After draining the petrol, start the engine and allow it to run until it runs out of petrol.

GB

Do not use flammable liquids when cleaning.

Serious engine damage can be caused if the machine is operated with a defective or blocked filter.

The paper filter must never be cleaning with liquid.

7 MAINTENANCE

WARNING!Repairs must be carried out by the dealer. Otherwise the guarantee becomes invalid.

WARNING!Before carrying out repairs and maintenance, the spark plug con- nection must be disconnected.

7.1 Periodic maintenance

Before each operation

•Check for fuel leaks.

•Check that all screws are tightened. After each operation

•Clean the rotary cultivator.

•Check for fuel leaks.

Every 25 operating hours and every 3 months

•Check, clean or replace the air filter.

•Check that all screws and nuts are tightened.

7.2 Air filter

The air filter is shown according to the table be- low:

Machine

Figure:Position

40-G

The engine manual

40R-G

The engine manual

50-G

The engine manual

50-H

The engine manual

50R-B

1:U

The air filter is shown according to the table be- low:

Machine

Figure:Position

40-G

The engine manual

40R-G

The engine manual

50-G

The engine manual

50-H

The engine manual

50R-B

1:U

The machine is equipped with a pre-filter (foam rubber) and a main filter (paper).

Clean/replace the air filter every 3 months or every 25 operating hours. During operation in dry and dusty conditions, the air filter must be cleaned/re- placed every day.

Clean/replace the air filter as follows:

1.Undo the screws or locking tabs and the filter housing.

2.Grasp the main filter (paper) and shake it a few times against a hard surface or blow clean with compressed air from the inside out.

3.Wash the pre-filter (foam rubber) in liquid de- tergent and water. Then carefully twist the filter out and allow to dry.

4.When the pre-filter is dry, reinstall the filter in reverse order.

The filters must be replaced if very dirty or defec- tive.

7.3 Spark plug

The spark plug is shown according to the table be- low:

Machine

Figure:Position

40-G

The engine manual

40R-G

The engine manual

50-G

The engine manual

50-H

The engine manual

50R-B

1:W

The sparkplug must be replaced in the following cases.

•When the electrodes are burnt.

•If the porcelain insulator indicates damage.

•If the rotary cultivator is difficult to start. The electrode gap should be 0.7-0.8 mm.

Use sparkplug Champion QC12YC or similar.

45

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Stiga C D Page Safety Instructions SymbolsAuxiliary wheel AssemblyHandle’s support HandleDescription 10Oil filling/draining Handle height adjustment 1GAuxiliary wheel 1T 12Rotors 1KOperation Periodic maintenance MaintenanceStorage Air filterPurchase Terms Service

40R-G, 40-G, 50-H, 50-G, 50R-B specifications

Stiga is a renowned name in the world of outdoor and garden equipment, particularly known for its high-quality lawn mowers and garden tractors. Among their impressive lineup, the Stiga 50-H, 40-G, 50R-B, 50-G, and 40R-G models stand out due to their advanced features and cutting-edge technologies. Each model is designed to cater to various lawn care needs while ensuring efficiency and ease of use.

The Stiga 50-H is equipped with a robust 50 cm cutting deck that ensures a wide cutting path, ideal for larger gardens. With a powerful engine, this model offers excellent performance, allowing users to tackle tough grass quickly and effectively. It features an adjustable cutting height, enabling users to set the grass length between various options for a precise cut.

Similarly, the Stiga 40-G model is designed for versatility with a 40 cm cutting deck. Ideal for medium-sized gardens, it combines maneuverability with performance. Featuring a lightweight design, the 40-G is easy to control and transport. Additionally, this model offers efficiency through its eco-friendly engine, minimizing emissions while maximizing power.

Transitioning to the Stiga 50R-B, this model is engineered for those seeking a reliable solution for larger mowing tasks. It boasts a rear-discharge cutting system that excels in distributing grass clippings evenly across the lawn. This not only saves time but also contributes to a healthier lawn by returning nutrients back to the soil.

The Stiga 50-G model is another powerhouse, similar to the 50-H in cutting width but distinguished by its innovative gear drive system, which ensures smooth operation on varying terrains. Its rugged construction guarantees durability, making it suitable for any condition.

Lastly, the Stiga 40R-G is a versatile model designed with the user in mind. It features a collapsible handle for easy storage and transport. With a focus on providing an effortless mowing experience, it integrates user-friendly controls and advanced safety features, making it accessible for both novice and experienced users alike.

In conclusion, the Stiga 50-H, 40-G, 50R-B, 50-G, and 40R-G models each bring unique attributes and cutting-edge technologies to the table. From their powerful engines and adjustable cutting heights to user-centric designs and eco-friendly features, these mowers are perfect for anyone looking to maintain a pristine lawn. Whether handling routine maintenance or tackling larger mowing tasks, Stiga delivers reliability and performance in every model.
Top Page Image Contents