GB | ENGLISH |
|
|
GENERAL
This symbol means WARNING. Per- sonal injury and/or damage to property can occur if the instructions are not fol- lowed carefully.
You must read these operating instruc- tions and the enclosed pamphlet “SAFETY INSTRUCTIONS” carefully before starting the machine.
SYMBOLS
The following symbols are displayed on the ma- chine to remind you of the care and attention re- quired when using the machine.
The symbols mean:
Warning!
Read the instruction book and safety man- ual before using the machine.
Warning!
Beware of objects being flung out. Keep spectators away.
Warning!
Always use hearing protectors.
Warning!
This machine is not intended to be driven on public roads.
Warning!
The machine, equipped with original ac- cessories, must not be driven in any direc- tion on slopes with a gradient of more than 10°.
Warning!
Risk for burn injuries. Do not touch the si- lencer.
CONTROLS AND
INSTRUMENTS
Items 1 - 9, see figures 1 - 3.
1. ACCESSORY LIFTER
Pedal for lifting
To lift up the accessory, press down the pedal as far as it goes. Release the pedal and the accessory lift- er will now be locked in the lift position.
To lower the accessory, press the pedal to release the lock. Lower the accessory lifter to working po- sition by slowly lifting your foot from the pedal.
2A. SERVICE BRAKE/CLUTCH (Master - Senator - Comfort)
Pedal which combines both the service brake and clutch. Three positions:
1.Pedal released – forward drive engaged. The machine starts to move if a gear is engaged. The service brake is not activated.
2.Pedal pressed halfway down – front drive disengaged, it is not possible to change gear. The service brake is not activated.
3.Pedal pressed fully down – front drive disengaged The serv- ice brake is fully activated.
NOTE! Do not regulate the speed by slipping the clutch. Use a suitable gear instead to obtain the right speed.
2B. SERVICE BRAKE (President - Royal)
Pedal which activates the machine’s brake system. Three positions:
1.Pedal released – forward drive not engaged.
2.Pedal pressed halfway – front drive disengaged The service brake is not activated.
3.Pedal pressed fully down – front drive disengaged The serv- ice brake is fully activated.
3.PARKING BRAKE
Inhibitor to lock the brake pedal in depressed posi- tion.
Press down the brake pedal fully. Move the inhibitor to the right and then release the brake pedal.
The parking brake is released by pressing the brake pedal. The
5