McIntosh XRT2K owner manual Important Safety Instructions

Page 2

WARNING - TO REDUCE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS EQUIPMENT TO RAIN OR MOISTURE.

NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL.

To prevent the risk of electric shock, do not remove cover or

back. No user serviceable parts inside.

IMPORTANT SAFETY

INSTRUCTIONS!

PLEASE READ THEM BEFORE OPERATING THIS EQUIPMENT.

1.Read these instructions.

2.Keep these instructions.

3.Heed all warnings.

4.Follow all instructions.

5.Do not use this apparatus near water.

6.Clean only with a non-abrasive dry soft cloth.

7.Install in accordance with the manufacturer’s instructions.

8.This Loudspeaker is capable of producing extremely high sound pressure levels, even when connected to amplifiers of moderate power output. User caution is advised. Ear protection is recommended when playing at high volumes as continued exposure to high sound pressure levels can cause permanent hearing impairment or loss. The use of a Sound Level Pressure Meter will greatly aid in determining when high volume levels are occurring.

9.Do not install near any heat sources such as radiators, heat registers, stoves, or other apparatus (including amplifiers) that produce heat.

10.Only use attachments/accessories specified by the manufacturer.

11.Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or

sold with the apparatus. When a cart

is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over.

12.Refer all servicing to qualified service personnel. Servicing is required when the apparatus has been damaged in any way, liquid has been spilled or objects have fallen into the apparatus, the apparatus has been exposed to rain or moisture, does not operate normally, or has been dropped.

13.Do not expose this equipment to dripping or splashing and ensure that no objects filled with liquids, such as vases, are placed on the equipment.

14.WARNING: When this Loudspeaker is connected to an amplifier that is Powered On, the connection terminals may have hazardous live voltages present with a risk of electric shock.

15.CAUTION: When this Loudspeaker is assembled it weighs 452 pounds (205.0 kgs). It requires four or more persons to safely move the Loudspeaker.

2

Image 2
Contents XRT2K Important Safety Instructions Table of Contents Safety Instructions Thank YouCustomer Service Please Take a MomentIntroduction Introduction and Performance Features Performance FeaturesLoudspeaker System Side View DimensionsFront View Loudspeaker SystemXRT2K Dimensions, con’t Unpacking the Low Frequency Column Lower Section Unpacking and AssemblyUnpacking the Midrange/High Frequency Column Unpacking the Low Frequency Column Upper SectionFinal Assembly of the Loudspeaker Room Placement Locating Loudspeakers for use in Home TheaterPage Low Frequency Column Rear Panel Connections How to Connect using a single Amplifier To the 8 ohm Binding Post C of the Power AmplifierMcIntosh MC2KW Power Amplifier Inch 35.6cm Jumper Wires How to Connect using two Amplifiers How to Connect using two Amplifiers How to Connect using three Amplifiers How to Connect using three Amplifiers Page Photos Specifications Specifications General SpecificationsPacking Instructions McIntosh Laboratory, Inc Chambers Street Binghamton, NY

XRT2K specifications

The McIntosh XRT2K stands as a monumental achievement in the world of high-fidelity loudspeakers, reflecting the brand's commitment to superior sound engineering and aesthetic design. Known for its distinctive look and powerful performance, this model blends cutting-edge technology with timeless craftsmanship, appealing to audio enthusiasts and professionals alike.

One of the most significant features of the XRT2K is its innovative speaker configuration. The design incorporates an array of drivers, including a high-frequency section with multiple tweeters that ensure detailed, clear highs. This is complemented by mid-range drivers that provide a full-bodied representation of vocals and instruments. The lower section features powerful woofers designed to deliver deep, controlled bass, creating a three-dimensional soundstage that envelops listeners.

The XRT2K utilizes McIntosh's proprietary techniques, such as its advanced driver alignment, which ensures precise timing and phase coherence across the audio spectrum. This results in an immersive listening experience where every note is accurately reproduced, maintaining the integrity of the original recording. The speaker’s unique design also minimizes unwanted resonances and distortions, allowing for a cleaner and more accurate sound.

Another standout characteristic of the XRT2K is its broad frequency response, which enables it to reproduce a wide range of musical genres effortlessly. Whether one is enjoying classical music with its intricate detail or high-energy rock tracks with throbbing bass, the XRT2K can handle it all without compromise. The depth of the soundstage is further enhanced by the speaker's ability to convey spatial information, allowing listeners to feel as though they are in the same room as the performers.

In terms of aesthetics, the XRT2K epitomizes luxury. Its sleek, modern design is complemented by iconic McIntosh styling, featuring glass panels, polished aluminum, and the signature blue VU meters. This not only makes it a visually striking addition to any audio setup but also matches well with high-end AV systems and home theaters.

Overall, the McIntosh XRT2K is a remarkable fusion of technology, craftsmanship, and design. With its advanced driver technology, meticulous engineering, and striking aesthetics, it stands out in the luxury audio market, promising an unparalleled listening experience that can satisfy the most discerning audiophiles.