Unpacking and Assembly

Figure 2

Figure 1

Follow the instructions below for unpacking and assembling the XRT2K Loudspeaker System. To protect the fine finish of the XRT2K Loudspeaker System during the assembly process, it is advisable to prepare a suitable assembly area. A freshly vacuumed carpeted area covered with a soft, clean fabric, such as a large bed linen or blanket would be suit- able. Start by unpacking the Midrange/High Frequency Col- umn.

It is recommended that the Professionals at your McIn- tosh Dealer, who are skilled in all aspects of installation and operation, install the XRT2K Loudspeaker System and any associated audio equipment.

CAUTION: When this Loudspeaker is assembled it weighs 452 pounds (205.0 kgs). It requires four or more persons to safely handle during assembly and placement in the room.

Unpacking the Midrange/High Frequency Column

1. Remove the banding material from the shipping carton. Refer to figure 1.

2. Lift off the top of the shipping carton and set

it aside. 3. Remove the accessory

carton from the ship- ping carton end.

4. Lift up on the rear of

the Midrange/High Frequency Column, which is located under the larger

Low Frequency Column Grille. Place the entire

assembly (Midrange/High Frequency Column with Grille attached, Low

Frequency Column Grille and foam packing material) in a safe area. Refer to figure 2.

5.Release the Low Frequency Column Grille from the foam packing material leaving it in the protective blue cloth cover and set it aside.

6.In a similar manner, release the Midrange/High Fre- quency Column with Grille in the protective blue cloth cover and set it aside.

Note: Save the pieces of foam packing material, as it will be used later during assembly of the Loudspeaker.

Unpacking the Low Frequency Column (Lower Section)

1.Remove the banding material from the shipping carton.

2.Lift off the top of the shipping carton and set it aside.

Note: When the top shipping carton is lifted up and away, the sides of the bottom shipping carton will unfold providing easier access to the column.

3.Remove the packing material from the bottom of the Low Frequency Column (with the base attached) and untie the draw cords on the bottom of the protective blue cloth cover.

4.Push the cloth cover up over the base of the column and position the column upright resting on its base.

5.Remove the remainder of the packing material from the column and the protective blue cloth cover.

Note: Save the protective blue cloth cover as it will be used later during assembly of the Loudspeaker.

6.Relocate the Low Frequency Column (Lower Section) onto the previously prepared assembly area with the Woofers facing upward. The bottom of the column base will need to be easily accessible for fastening both sec- tions of the columns together. Sufficient space also needs to be provided for positioning the Low Frequency Column (Upper Section), next to be unpacked, with the Low Frequency Column (Lower Section).

Unpacking the Low Frequency Column (Upper Section)

1.Remove the banding material from the shipping carton.

2.Lift off the top of the shipping carton and set it aside.

3.Remove the packing material from the bottom of the Low Frequency Column (Upper Section) with the flat end and untie the draw cords on the bottom of the pro- tective blue cloth cover.

4.Push the cloth cover up over the flat end of the column and position the column upright resting on its flat end.

5.Remove the remainder of the packing material from the column and the protective blue cloth cover.

Note: Save the protective blue cloth cover as it will be used later during assembly of the Loudspeaker.

6.Relocate the Low Frequency Column (Upper Section) together with the previously placed Low Frequency Column (Lower Section) in the assembly area.

Assembly of the Low Frequency Column (Lower and Upper Sections)

1.Locate the supplied tools in the Accessory Carton previ- ously removed from the Midrange/High Frequency Col- umn Shipping Carton.

2.Line up the three metal pins located on the top metal plate of the Low Frequency Column (Lower Section) with the three openings on the bottom metal plate of the

XRT2K specifications

The McIntosh XRT2K stands as a monumental achievement in the world of high-fidelity loudspeakers, reflecting the brand's commitment to superior sound engineering and aesthetic design. Known for its distinctive look and powerful performance, this model blends cutting-edge technology with timeless craftsmanship, appealing to audio enthusiasts and professionals alike.

One of the most significant features of the XRT2K is its innovative speaker configuration. The design incorporates an array of drivers, including a high-frequency section with multiple tweeters that ensure detailed, clear highs. This is complemented by mid-range drivers that provide a full-bodied representation of vocals and instruments. The lower section features powerful woofers designed to deliver deep, controlled bass, creating a three-dimensional soundstage that envelops listeners.

The XRT2K utilizes McIntosh's proprietary techniques, such as its advanced driver alignment, which ensures precise timing and phase coherence across the audio spectrum. This results in an immersive listening experience where every note is accurately reproduced, maintaining the integrity of the original recording. The speaker’s unique design also minimizes unwanted resonances and distortions, allowing for a cleaner and more accurate sound.

Another standout characteristic of the XRT2K is its broad frequency response, which enables it to reproduce a wide range of musical genres effortlessly. Whether one is enjoying classical music with its intricate detail or high-energy rock tracks with throbbing bass, the XRT2K can handle it all without compromise. The depth of the soundstage is further enhanced by the speaker's ability to convey spatial information, allowing listeners to feel as though they are in the same room as the performers.

In terms of aesthetics, the XRT2K epitomizes luxury. Its sleek, modern design is complemented by iconic McIntosh styling, featuring glass panels, polished aluminum, and the signature blue VU meters. This not only makes it a visually striking addition to any audio setup but also matches well with high-end AV systems and home theaters.

Overall, the McIntosh XRT2K is a remarkable fusion of technology, craftsmanship, and design. With its advanced driver technology, meticulous engineering, and striking aesthetics, it stands out in the luxury audio market, promising an unparalleled listening experience that can satisfy the most discerning audiophiles.