Stow manual STR46SP Controls and Indicators

STR46SP — CONTROLS AND INDICATORS

1.Seat – Engine will neither start nor run unless operator is seated.

2.Steering Control Levers – Directs the unit forward, reverse, left, or right.

3.Retardant Spray Control Button – Sprays retardant through the nozzle at the front of the machine.

4.Pitch Control – Turn the crank as marked on its top surface to increase or decrease blade pitch.

Twin Pitch Control (Option) – Both pitch towers are linked together. One crank may be turned to adjust the blade pitch simultaneously or individually controlled for each set of blades.

5.Light Switch – Turns on three halogen lights.Two in front one in rear.

6.Ignition Switch – With key inserted, turn clockwise to start engine.

7.Hour Meter – Indicates number of hours the engine has run.

8.Choke Control Lever – In cold weather pull this lever to start engine. After engine warms push knob all the way in.

9.Fuel Gauge/Filler Cap – Indicates the amount of fuel in the fuel tank. Remove this cap to add fuel.

10.Fuel Tank – Holds 5 gallons of unleaded gasoline.

11.Left Foot Riser – Operator foot rest pedal.

12.Spray Nozzle – Spray nozzle for retardant.

13.Right Foot Pedal – Controls blade speed. Slow blade speed is accomplished by slightly depressing the foot pedal. Maximum blade speed is accomplished by fully depressing the foot pedal.

14.EZ- Mover Boss – Front attachment point for EZ Mover. Used to move the trowel.

15.Dip Stick – Use to verify correct amount of engine oil.

16.Spark Plug – Access the spark plug through this cutout.

2

1

4

5

819

6

7

28

3

9

10

12

13

14

26

15

16

18

11

14

Figure 2. STR46SP Controls and Indicators (Front)

STR46SP • RIDE-ON POWER TROWEL — OPERATION MANUAL — REV. #1 (08/01/06) — PAGE 18