Stanley Black & Decker CS06, CS05 Underwater Tools Depth Guideline, Underwater Models only, Gpm

Page 24

UNDERWATER TOOLS DEPTH GUIDELINE

UNDERWATER MODELS ONLY

CAUTION

DO NOT USE HYDRAULIC TOOLS UNDER- WATER THAT ARE NOT DESIGNATED AS AN “UNDERWATER” MODEL, OR THIS WILL RESULT IN DAMAGE TO THE TOOL.

For underwater hydraulic tools the applications are broken down into four quadrants depending on type of tool and method of operation.

The types of tools are percussive and rotational, each with different characteristics allowing for dif- ferent depth operation. With percussive tools, the nitrogen accumulator PSI must counter the in- crease in ambient pressure found at lower depths. Since there is a maximum PSI for percussive tools they are limited to certain depths. Rotational tools do not have accumulators and thus capable of deeper depths.

The methods are broken into diver operated or remote operated vehicle (ROV). ROV's can reach lower depths and with an on-board hydraulic power source that is depth compensated, can operate hydraulic tools at depths of thousands of feet. ROV operation is still limited to the tool, for example a percussive tool has the same depth limitation whether ROV or diver operated.

Operation Overview

 

Percussive

 

Rotational

 

 

 

Tools: Breakers,

 

Tools: Grinders,

 

Hammer Drills and

 

Saws, Chain Saws

 

Chipping Hammers

 

Max Depth: 1000' -

Diver

 

 

Max Depth: 500' -

 

Reference hose

 

 

 

limitations due to

 

sizing guide below

 

accumulator PSI

 

 

 

max (increase 40

 

 

 

PSI for every 100')

 

 

 

 

 

 

 

Tools: Breakers,

 

Tools: Grinders,

 

Hammer Drills and

 

Saws, Chain Saws

ROV

Chipping Hammers

 

Max Depth: 1000' -

 

 

 

 

 

 

Max Depth: 500' -

 

Reference hose

 

limitations due to

 

sizing guide below

 

accumulator PSI

 

 

 

max (increase 40

 

 

 

PSI for every 100')

 

 

 

 

 

 

Recommended Hose Diameters

Depth (ft)

8 GPM

12 GPM

100

5/8”

5/8”

300

3/4”

1”

600

1”

1”

1000

1”

1-1/4”

24 ► CS05/06 User Manual

Page 23 Page 25
Image 24
Page 23 Page 25
Contents Hydraulic Chain SAW Page Table of Contents Safety Symbols Local Safety RegulationsSafety Precautions Safety Precautions Electrical Precautions Working in Proximity to Electrical HazardsStorm Work and Emergency CONDITIONS-LINE Clearance 107 Tool Stickers & TagsHose Safety Tags Hose TypesHose Recommendations Tool to Hydraulic Circuit Hose RecommendationsHtma / Ehtma Requirements Htma / Ehtma RequirementsPreoperation Procedures Operating ProceduresOperation Felling Cutting Down a Tree Figure Notching or UndercuttingFelling or Back CUT BuckingLogs with Pressure on TOP Figure Crosscutting Logs with Pressure on TopLOGS/LIMBS with Pressure on Bottom Figure Crosscutting Logs/Limbs with Pressure on BottomCold Weather Operation Pruning and DebranchingTool Protection & Care Troubleshooting Problem Cause RemedyAccessories Service ToolsCS05/CS06 Parts Illustration CS05/CS06 Parts List Part QTY DescriptionKeeper Underwater Tools Depth Guideline Underwater Models onlyGPM

CS05, CS06 specifications

Stanley Black & Decker is well-known for its innovative solutions and high-quality tools, and its CS05 and CS06 models exemplify these qualities. These products are integral to both professional contractors and DIY enthusiasts, representing the brand's commitment to durability, efficiency, and user-friendly design.

The Stanley Black & Decker CS05 is characterized by its powerful performance and compact design. This model is equipped with a high-efficiency motor that delivers exceptional cutting power. Its lightweight construction enhances maneuverability, making it an easy choice for complex jobs in tight spaces. The CS05 also features an ergonomic handle, designed for maximum comfort during extended use.

One of the notable technologies in the CS05 is its advanced blade system. The blade can be easily adjusted, allowing users to switch between different cutting applications seamlessly. The model also incorporates a safety guard to protect users from accidental blade exposure, ensuring a safer operation for both professionals and hobbyists alike.

On the other hand, the CS06, while similar in many respects, includes several upgraded features that enhance its functionality. With an even more robust motor, the CS06 can handle tougher materials, making it ideal for heavy-duty applications. This model boasts an integrated laser guide system that improves precision, ensuring that cuts are accurate every time.

Moreover, the CS06 is designed with a quick-release mechanism for blade changes, minimizing downtime and allowing for more efficient workflows. The durable casing of the CS06 is engineered to withstand harsh job site conditions, providing longevity and reliability.

Both models incorporate Stanley Black & Decker's Smart Technology, which optimizes power consumption while maximizing output. This not only contributes to energy efficiency but also extends the overall lifespan of the tools.

In summary, the Stanley Black & Decker CS05 and CS06 are powerful, versatile, and user-centric tools that embody the brand's dedication to quality and innovation. Whether you're tackling intricate DIY projects or major construction tasks, these models deliver the performance and reliability you need. With their combined cutting-edge features and technologies, they stand out in the competitive landscape of professional-grade tools.
Top Page Image Contents