Stanley Black & Decker CS05, CS06 manual 107, Tool Stickers & Tags

Page 9

TOOL STICKERS & TAGS

DANGER

Failure to use hydraulic hose labeled and certified as non-conductive when using hydraulic tools on or near electric lines may result in death or serious injury.

 

For proper and safe operation read owners manual

 

and mwke sure that you have been properly

ELECTROCUTION

trained in correct procedures required for work

on or around electric lines.

HAZARD

 

12412

Electrical Warning Decal

D

30 LPM @ 138 B AR EHTMA CATEGORY

11207

Circuit Type D Decal

(CE Models Only)

28409 Composite Decal (CE Models Only)

Lwa

 

107

 

17784

28323

CE Decal

101 Sound Level

(CE Models Only)

Decal

 

(CE Models Only)

 

4-6 GPM / 15-22 LPM

DO NOT EXCEED 2000 PSI / 140 BAR

DO NOT EXCEED SPECIFIED FLOW OR PRESSURE

USE CLOSED-CENTER TOOL ON CLOSED-CENTER

SYSTEM. USE OPEN-CENTER TOOL ON OPEN-CENTER

SYSTEM. CORRECTLY CONNECT HOSES TO TOOL “IN”

AND “OUT” PORTS. IMPROPER HANDLING, USE OR OTHER

MAINTENANCE OF TOOL COULD RESULT IN A LEAK, BURST

OR OTHER TOOL FAILURE. CONTACT AT A LEAK OR BURST

CAN CAUSE OIL INJECTION INTO THE BODY. FAILURE TO

OBSERVE THESE PRECAUTIONS CAN RESULT IN SERIOUS

PERSONAL INJURY.

03782

GPM Decal – CS05 Model

03786

13907

GPM Decal – CS06 Model (Not Shown)

Kickback Warning Decal

Stanley Hydraulic Tools

3810 SE Naef Road

Milwaukie, OR 97062

Model

07636 Name Tag

THIS CHAIN SAW IS EQUIPPED WITH AN AUTOMATIC CHAIN OILER.

SEE YOUR PARTS & SERVICE BOOK FOR PROPER ADJUSTING PROCEDURES

04746

Auto Oiler Decal

D A N G E R

1.

FAILURE TO USE HYDRAULIC HOSE LABELED AND CERTI-

 

FIED AS NON-CONDUCTIVE WHEN USING HYDRAULIC

 

TOOLS ON OR NEAR ELECTRICAL LINES MAY RESULT IN

 

DEATH OR SERIOUS INJURY.

 

BEFORE USING HOSE LABELED AND CERTIFIED AS NON-

 

CONDUCTIVE ON OR NEAR ELECTRIC LINES BE SURE THE

 

HOSE IS MAINTAINED AS NON-CONDUCTIVE. THE HOSE

 

SHOULD BE REGULARLY TESTED FOR ELECTRIC CURRENT

 

LEAKAGE IN ACCORDANCE WITH YOUR SAFETY DEPART-

 

MENT INSTRUCTIONS.

2.

A HYDRAULIC LEAK OR BURST MAY CAUSE OIL INJECTION

 

INTO THE BODY OR CAUSE OTHER SEVERE PERSONAL

 

INJURY.

 

A. DO NOT EXCEED SPECIFIED FLOW AND PRESSURE

 

FOR THIS TOOL. EXCESS FLOW OR PRESSURE MAY

 

CAUSE A LEAK OR BURST.

 

B. DO NOT EXCEED RATED WORKING PRESSURE OF

 

HYDRAULIC HOSE USED WITH THIS TOOL. EXCESS

 

PRESSURE MAY CAUSE A LEAK OR BURST.

 

C. CHECK TOOL HOSE COUPLERS AND CONNECTORS

 

DAILY FOR LEAKS. DO NOT FEEL FOR LEAKS WITH

D A N G E R

 

D. DO NOT LIFT OR CARRY TOOL BY THE HOSES. DO

 

NOT ABUSE HOSE. DO NOT USE KINKED, TORN OR

 

DAMAGED HOSE.

3.

MAKE SURE HYDRAULIC HOSES ARE PROPERLY CON-

 

NECTED TO THE TOOL BEFORE PRESSURING SYSTEM.

 

SYSTEM PRESSURE HOSE MUST ALWAYS BE CON-

 

NECTED TO TOOL “IN” PORT. SYSTEM RETURN HOSE

 

MUST ALWAYS BE CONNECTED TO TOOL “OUT” PORT.

 

REVERSING CONNECTIONS MAY CAUSE REVERSE

 

TOOL OPERATION WHICH CAN RESULT IN SEVERE

 

PERSONAL INJURY.

4.

DO NOT CONNECT OPEN-CENTER TOOLS TO CLOSED-

 

CENTER HYDRAULIC SYSTEMS. THIS MAY RESULT IN

 

LOSS OF OTHER HYDRAULIC FUNCTIONS POWERED BY

 

THE SAME SYSTEM AND/OR SEVERE PERSONAL INJURY.

5.

BYSTANDERS MAY BE INJURED IN YOUR WORK AREA.

 

KEEP BYSTANDERS CLEAR OF YOUR WORK AREA.

6.

WEAR HEARING, EYE, FOOT, HAND AND HEAD PRO-

 

TECTION.

7.

TO AVOID PERSONAL INJURY OR EQUIPMENT DAMAGE,

 

ALL TOOL REPAIR MAINTENANCE AND SERVICE MUST

NOTE

THE INFORMATION LISTED ON THE

STICKERS SHOWN, MUST BE LEGIBLE AT ALL

TIMES.

REPLACE DECALS IF THEY BECOME WORN

OR DAMAGED. REPLACEMENTS ARE

AVAILABLE FROM YOUR LOCAL STANLEY

DISTRIBUTOR.

The safety tag (P/N 15875) at right is attached to the tool when shipped from the factory. Read and understand the safety instructions listed on this tag before removal. We suggest you retain this tag and attach it to the tool when not in use.

YOUR HANDS. CONTACT WITH A LEAK MAY RESULT

IN SEVERE PERSONAL INJURY.

I M P O R T A N T

READ OPERATION MANUAL AND SAFETY INSTRUCTIONS FOR THIS TOOL BEFORE USING IT.

USE ONLY PARTS AND REPAIR PROCEDURES APPROVED BY STANLEY AND DESCRIBED IN THE OPERATION MANUAL.

TAG TO BE REMOVED ONLY BY

TOOL OPERATOR.

SEE OTHER SIDE

ONLY BE PERFORMED BY AUTHORIZED AND PROPERLY

TRAINED PERSONNEL.

I M P O R T A N T

READ OPERATION MANUAL AND SAFETY INSTRUCTIONS FOR THIS TOOL BEFORE USING IT.

USE ONLY PARTS AND REPAIR PROCEDURES APPROVED BY STANLEY AND DESCRIBED IN THE OPERATION MANUAL.

TAG TO BE REMOVED ONLY BY

TOOL OPERATOR.

SEE OTHER SIDE

SAFETY TAG P/N 15875 (Shown smaller then actual size)

CS05/CS06 User Manual ◄ 9

Page 8 Page 10
Image 9
Page 8 Page 10
Contents Hydraulic Chain SAW Page Table of Contents Local Safety Regulations Safety SymbolsSafety Precautions Safety Precautions Working in Proximity to Electrical Hazards Electrical PrecautionsStorm Work and Emergency CONDITIONS-LINE Clearance Tool Stickers & Tags 107Hose Types Hose Safety TagsTool to Hydraulic Circuit Hose Recommendations Hose RecommendationsHtma / Ehtma Requirements Htma / Ehtma RequirementsPreoperation Procedures Operating ProceduresOperation Notching or Undercutting Felling Cutting Down a Tree FigureFelling or Back CUT BuckingCrosscutting Logs with Pressure on Top Logs with Pressure on TOP FigureCrosscutting Logs/Limbs with Pressure on Bottom LOGS/LIMBS with Pressure on Bottom FigurePruning and Debranching Cold Weather OperationTool Protection & Care Problem Cause Remedy TroubleshootingService Tools AccessoriesCS05/CS06 Parts Illustration Part QTY Description CS05/CS06 Parts ListKeeper Underwater Tools Depth Guideline Underwater Models onlyGPM

CS05, CS06 specifications

Stanley Black & Decker is well-known for its innovative solutions and high-quality tools, and its CS05 and CS06 models exemplify these qualities. These products are integral to both professional contractors and DIY enthusiasts, representing the brand's commitment to durability, efficiency, and user-friendly design.

The Stanley Black & Decker CS05 is characterized by its powerful performance and compact design. This model is equipped with a high-efficiency motor that delivers exceptional cutting power. Its lightweight construction enhances maneuverability, making it an easy choice for complex jobs in tight spaces. The CS05 also features an ergonomic handle, designed for maximum comfort during extended use.

One of the notable technologies in the CS05 is its advanced blade system. The blade can be easily adjusted, allowing users to switch between different cutting applications seamlessly. The model also incorporates a safety guard to protect users from accidental blade exposure, ensuring a safer operation for both professionals and hobbyists alike.

On the other hand, the CS06, while similar in many respects, includes several upgraded features that enhance its functionality. With an even more robust motor, the CS06 can handle tougher materials, making it ideal for heavy-duty applications. This model boasts an integrated laser guide system that improves precision, ensuring that cuts are accurate every time.

Moreover, the CS06 is designed with a quick-release mechanism for blade changes, minimizing downtime and allowing for more efficient workflows. The durable casing of the CS06 is engineered to withstand harsh job site conditions, providing longevity and reliability.

Both models incorporate Stanley Black & Decker's Smart Technology, which optimizes power consumption while maximizing output. This not only contributes to energy efficiency but also extends the overall lifespan of the tools.

In summary, the Stanley Black & Decker CS05 and CS06 are powerful, versatile, and user-centric tools that embody the brand's dedication to quality and innovation. Whether you're tackling intricate DIY projects or major construction tasks, these models deliver the performance and reliability you need. With their combined cutting-edge features and technologies, they stand out in the competitive landscape of professional-grade tools.
Top Page Image Contents