SportDOG 400 & 400S manual Prepare the Collar Receiver, Receiver Indicator Light

Page 5

STEP :: 02

Prepare the Collar Receiver

Charge the Collar Receiver

1.Lift the rubber cover protecting the Charging Jack.

2.Connect the charger connector to the Charging Jack.

3.Plug the charger into a standard 120-volt AC wall outlet.

4.Charge the Collar Receiver for 24 hours for the first charge. Recharges take only 12 hours.

Note: The Receiver Indicator Light will flash after 12 hours of charging. For the first charge, continue to charge the Collar Receiver for an additional 12 hours.

5.When charging is complete, replace the rubber cover.

Charger connector placed in Collar Receiver Charging Jack

Receiver Indicator Light

Operational

Light

Light

Battery

Speaker

Mode

Color

Function

Status

Function

Unit is charging

Red

Light is solid

N/A

N/A

< 12 hours

 

 

 

 

Unit is charging

Green

Light is flashing once per

N/A

N/A

> 12 hours

 

second

 

 

Unit is turned on via

Green

Light is solid in color during

N/A

Beeps 5 times

On/Off Button

 

beep sequence

 

 

Unit is turned off via

Green

Light is solid in color during

Good

Beeps 2 times

On/Off Button

 

beep sequence

 

 

Unit is turned off via

Red

Light is solid in color during

Low

Beeps 2 times

On/Off Button

 

beep sequence

 

 

Unit is on

Green

Light flashes once per

Good

N/A

 

 

second

 

 

Unit is on

Red

Light flashes once per

Low

N/A

 

 

second

 

 

Unit is delivering

Red

Light is solid in color for as

N/A

N/A

8

If the Collar Receiver is used in or around salt water, the Collar Receiver should be rinsed with fresh water following each use. Prior to rinsing, the rubber charging jack cover should be removed from the power plug socket and left out until the Collar Receiver has air dried.

To Turn the Collar Receiver On:

1.Momentarily press and hold the On/Off Button until the Receiver Indicator Light comes on and the Collar Receiver beeps 5 times.

2.Release the On/Off Button.

The Receiver Indicator Light will flash until the Collar Receiver is turned off. The flashing light indicates the Collar Receiver is ready to receive a radio signal from the Remote Transmitter.

On/Off Button

To Turn the Collar Receiver Off:

1.Momentarily press and hold the On/Off Button until the Receiver Indicator Light comes on solid and the Collar Receiver beeps 2 times.

2.Release the On/Off Button.

To extend the life between charging cycles, turn the Collar Receiver off when it is not in use.

Note: Approximate battery life between charges is 40 hours, depending on frequency of use.

1-800-732-0144

continuous stimulation

 

long as button is pressed

 

 

Unit is delivering

Red

Light will quickly flash once

N/A

N/A

momentary stimulation

 

no matter how long button

 

 

 

 

is pressed

 

 

Unit is delivering tone

Off

N/A

N/A

Unit will beep

 

 

 

 

for as long

 

 

 

 

as button is

 

 

 

 

pressed

Rechargeable Batteries

WARNING

This device contains Nickel-metal hydride (NiMH) batteries; never incinerate, puncture, deform, short-circuit, or charge with an inappropriate charger. Fire, explosion, property damage, or bodily harm may occur if this warning is not followed.

Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions (page 19).

The rechargeable Nickel-metal hydride (NiMH) batteries are not memory sensitive and do not require depletion before charging. Batteries should never be removed from the battery compartment for charging.

The batteries come partially charged from the factory, but will require a full charge before the first use (24 hours).

When storing the unit for long periods, remember to regularly give batteries a full charge (12 hours). This should be done once every 4 to 6 weeks.

To maximize battery life, after initial charge, it is not recommended to leave the battery plugged in for more than 12 hours.

If your equipment has not been charged for an extended period, you may experience a decrease in battery life the first few uses. Afterwards, the battery life will return to previous capacity levels.

www.sportdog.com

9

400-696-4.indd 8-9

9/1/10 2:53 PM

Image 5
Contents Operating Guide Which, if not avoided, could result in harm to your dog Important Safety InformationDeath or serious injury How the System Works Table of ContentsCharge the Remote Transmitter Transmitter Indicator LightPrepare the Remote Transmitter Prepare the Collar Receiver Receiver Indicator LightFind the Best Intensity Level for Your Dog Fit the Collar ReceiverTest Light Instructions Finding Your Dog’s Recognition LevelBy Intensity Dial On Intensity Dial Continuous Stimulation General Training TipsBefore Training Your Dog with This Product Match the Collar Receiver and remote transmitter AccessoriesOperation Component Part NumberAround salt water? Receiver?With more than one dog? On aggressive dogs?Terms of Use and Limitation of Liability Fieldtrainer

400 & 400S specifications

The SportDOG 400 and 400S are advanced e-collars designed for serious dog trainers and hunters who require effective, reliable, and user-friendly solutions for collar training. Both models embody a range of innovative features that streamline training processes and enhance communication between trainer and dog.

One of the standout characteristics of the SportDOG 400 and 400S is their impressive range. With up to 400 yards of coverage, these collars give you the flexibility to train at a distance, making them ideal for open field training and hunting scenarios. This extended range allows for more freedom of movement while maintaining control over your dog’s actions.

The SportDOG 400 and 400S utilize a state-of-the-art, 7 correction levels, allowing users to customize stimulation intensity based on their dog's temperament and training needs. This feature is essential for ensuring the training remains effective without being overly aversive. The collars are designed to deliver both static stimulation and vibration, which can be adjusted to suit the unique responses of each dog.

Durability is a key aspect of these e-collars. Built with a rugged design, they are waterproof and submersible, allowing them to withstand various weather conditions and environments. This feature is particularly advantageous for hunters working in wet conditions or for dogs that enjoy swimming. Additionally, the battery life of the SportDOG 400 and 400S is noteworthy, offering consistent performance that allows for extended outdoor use without frequent recharging.

Another important technology embedded in these collars is the DRYTEK technology, which provides a rapid response time, ensuring immediate feedback during training sessions. The SportDOG 400S model additionally includes a Remote Beeper, enhancing tracking capabilities—ideal for hunting breeds as it allows for locating dogs in dense cover or long distances.

The SportDOG 400 and 400S are designed for ease of use. Whether you’re a seasoned trainer or a novice, the intuitively arranged buttons on the handheld transmitter allow for quick adjustments on the fly. The lightweight design ensures comfort for the dog, enabling extended periods of wear without causing stress.

Ultimately, the SportDOG 400 and 400S are suitable for various training purposes, including obedience, recall, and behavioral correction. Their combination of range, durability, and user-friendly features makes them an essential tool for any serious dog trainer or hunter looking to enhance their training techniques effectively.