Stanley Black & Decker CS25/28 manual Operation, PRE-OPERATION Procedures, Check Tool

Page 13

OPERATION

PRE-OPERATION PROCEDURES

CHECK POWER SOURCE

1.Using a calibrated flowmeter and pressure gauge, make sure the hydraulic power source develops a flow of 4-6 gpm /15-22 lpm at 1500-2000 psi/105/140 bar for the CS25 or a flow of 7-9 gpm/26-34 lpm at

1000-2000 psi/70-140 bar for the CS28.

2.Make sure the power source is equipped with a re- lief valve set to open at 2100-2250 psi/145-155 bar.

3.Check that the dual spool valve is set to the hydrau- lic system type (open-center (CC) or closed-center (CC) operation).

CHECK TOOL

1.Make sure all tool accessories are correctly in- stalled. Failure to install tool accessories properly can result in damage to the tool or personal injury.

2.There should be no signs of leaks.

3.The tool should be clean, with all fittings and fasten- ers tight.

CHECK TRIGGER MECHANISM

1.Check that the trigger operates smoothly and is free to travel between the ON and OFF positions.

SETTING THE DUAL SPOOL FOR OPERATION

IMPORTANT

This tool is furnished with a on-off spool commonly

referred to as a “dual spool” which permits

adjustment so the tool may be operated on either a open-center hydraulic system or a closed-center hydraulic system. The dual spool is normally

set to the open-center (OC) position at time of manufacture. The dual spool can also be disabled so that the tool may be set to open-center only operation or closed-center only operation. For more details, please refer to the following instructions.

SETTING FOR OPEN-CENTER (OC) OR CLOSED-CENTER (CC) OPERATION

To set the tool for OC system operation turn the selec- tor screw located in the top of the valve spool fully out (counter-clockwise) until it hits the stop.

To set the tool for CC system operation turn the selector

screw located in the top of the valve spool fully in (clock- wise) until it bottoms.

TO DISABLE DUAL SPOOL OPERATION AND CONVERT TO OC ONLY OPERATION

Turn the selector screw located in the top of the valve spool fully out (counter-clockwise) until it hits the stop.

1.Insert the small plug from the kit (furnished with the tool) into the hole located in the top of the selector screw. Tap the plug down using a small punch and hammer. DO NOT USE ANY ADHESIVES.

TO DISABLE DUAL SPOOL OPERATION AND CONVERT TO CC ONLY OPERATION

1.Turn the selector screw located in the top of the valve spool fully in (clockwise) until it bottoms.

2.Insert the small plug from the kit (furnished with the tool) into the hole located in the top of the selector screw. Tap the plug down using a small punch and hammer. DO NOT USE ANY ADHESIVES.

CONNECTING HOSES

1.Wipe all hose couplers with a clean lint-free cloth before making connections.

2.Connect the hoses from the hydraulic power source to the tool fittings or quick disconnects. It is a good practice to connect return hoses first and discon- nect them last to minimize or avoid trapped pressure within the tool.

3.Observe the arrow on the couplers to ensure that the flow is in the proper direction. The female cou- pler on the tool is the inlet (pressure) coupler.

4.Move the hydraulic circuit control valve to the ON position to operate the tool.

NOTE:

If uncoupled hoses are left in the sun, pressure in- crease inside the hoses can make them difficult to connect. If possible, connect the free ends of the hoses together.

CS25/28 User Manual ◄ 13

Image 13
Contents Hydraulic Pole Chain SAW Weisbeck, Andy Declaration of ConformityTable of Contents Local Safety Regulations Safety SymbolsSafety Precautions Pole Chain SAW Specific Safety Precautions Working in Proximity to Electrical Hazards Electrical HazardsStorm Work and Emergency CONDITIONS-LINE Clearance Composite Decal Tool Stickers & TagsHose Types Hose Safety TagsTool to Hydraulic Circuit Hose Recommendations Hose RecommendationsHtma / Ehtma Requirements Htma / Ehtma RequirementsOperation PRE-OPERATION ProceduresCheck Tool Felling or Topping Tool OperationPruning & Trimming Cold Weather OperationTOPPING/LOWERING Limbs Limbing and BuckingChain Tension Adjustment Automatic Oiler AdjustmentTool Protection & Care Problem Cause Solution TroubleshootingAccessories SpecificationsService Tools CS25 / CS28 Parts Illustration Part QTY Description CS25 / CS28 Parts List

CS25/28 specifications

The Stanley Black & Decker CS25/28 stands out in the market of power tools, particularly for professionals in the construction and automotive industries. This tool represents a blend of advanced engineering and user-focused design, making it an essential piece of equipment for various cutting applications.

The CS25/28 is built with a powerful motor that delivers exceptional performance, ensuring that it can tackle heavy-duty tasks with ease. Its high RPM capability allows users to complete jobs quickly, saving valuable time on the job site. The tool's robust construction provides durability, allowing it to withstand the rigors of daily use in demanding environments.

One of the standout features of the CS25/28 is its ergonomic design. The tool incorporates a comfortable grip that reduces user fatigue, enabling extended use without strain. This is particularly important for professionals who rely on their tools for hours at a time. Additionally, the weight distribution of the tool has been optimized to enhance balance and control, making it easier to handle during intricate work.

The CS25/28 is equipped with several advanced technologies to enhance its cutting capabilities. For instance, it features a precision cutting blade that ensures clean and accurate cuts across various materials, including wood, metal, and plastic. The blade's design minimizes friction, which helps extend its lifespan and maintain cutting efficiency.

Another noteworthy technology is the tool's adjustable speed settings. This allows users to customize the cutting speed according to the material they are working with, providing flexibility and precision for different applications. The variable speed control ensures the best results whether engaging in delicate tasks or high-speed cutting.

Safety is paramount, and the CS25/28 comes with several integrated safety features. It includes a safety switch that prevents accidental startups, ensuring that the tool is only operational when the user intends it to be. Additionally, the sturdy blade guard offers added protection, making it safer for users during operation.

In conclusion, the Stanley Black & Decker CS25/28 is a versatile, powerful, and user-friendly tool that meets the needs of professionals across various industries. With its robust motor, advanced technologies, ergonomic design, and safety features, it stands as a reliable choice for anyone looking to invest in a high-quality cutting tool. Whether for construction, automotive repair, or DIY projects, the CS25/28 delivers exceptional performance and reliability.