Tool Operation, Felling or Topping | Stanley Black & Decker CS25/28

OPERATION

TOOL OPERATION

WARNING

The following are general woodcutting procedures and techniques. Differences in the terrain, vegetation and type of wood will make this information more or less valid for particular areas. For advice on specific wood cutting problems or techniques for your area, consult you local Stanley representative or your county agent. They can often provide information that will make your work safer and more productive.

WARNING

Watch for falling limbs.

4.Make a diagonal cut down to meet the horizontal cut and remove the wood from the notch.

FELLING OR BACK CUT

5.The felling or back cut is made on the side opposite and at least 2 inches above the horizontal undercut (the felling cut is made higher as the size of the tree increases).

CUTTING TIPS

1.Check the lean of the tree. Tie a weight to a piece of string about 2 feet long. Hang the weight in your line of sight. The string is a good vertical line to help you judge the lean of a tree. The tree should fall the way the string is leaning. Trees that are straight (leaning no more than 5°) generally can be felled in any direction.

2.Check the weight distribution. A tree is heavier on the side with the most limbs. It will try to fall on its heavy side. Trim a few limbs to balance the tree.

3.Clear the work area. You need a clean area all around the tree. Get everything out of the area where the limbs might fall. Do not cut trees near structures. Because of the danger of electrocution, use extreme care when cutting trees near power lines.

4.The chain saw should cut with very little pressure applied to the handle. If you have to force the cut or if the cut is not straight, cease cutting immediately to prevent further saw chain and bar damage. See the MAINTENANCE AND ADJUSTMENTS section in this manual for chain replacement, sharpening or adjustment procedures.

FELLING OR TOPPING

1. Observe safety precautions.

NOTCHING OR UNDERCUTTING

2.The notching or undercutting cut is made on the side you want the tree to fall.

3.Start the cut horizontally. Cut to about one-quarter of the tree’s diameter.

6.Start the cut horizontally parallel to the notch cut. Cut until the saw is about 1 or 2 inches from the notch. DO NOT CUT THROUGH THE NOTCH.

NOTE:

The uncut wood between the felling and notch cuts is called the hinge. The hinge controls the fall of the tree and should be of uniform thickness.

7.As the saw nears the back cut, watch the tree-top and the cut for signs of movement. Be alert as soon as the tree starts to move, turn off the saw, pull it from the tree and move away quickly on your es- cape route.

Figure 2. Felling a Tree

LOGS/LIMBS WITH PRESSURE ON BOTTOM

1.Observe all safety precautions.

2.Begin with a bottom-cut. The depth of the cut should be about one-third of the log diameter.

3.Finish with an upper cut, down from the top. The saw cuts should meet.

14 ► CS25/28 User Manual

CS25/28 specifications

The Stanley Black & Decker CS25/28 stands out in the market of power tools, particularly for professionals in the construction and automotive industries. This tool represents a blend of advanced engineering and user-focused design, making it an essential piece of equipment for various cutting applications.

The CS25/28 is built with a powerful motor that delivers exceptional performance, ensuring that it can tackle heavy-duty tasks with ease. Its high RPM capability allows users to complete jobs quickly, saving valuable time on the job site. The tool's robust construction provides durability, allowing it to withstand the rigors of daily use in demanding environments.

One of the standout features of the CS25/28 is its ergonomic design. The tool incorporates a comfortable grip that reduces user fatigue, enabling extended use without strain. This is particularly important for professionals who rely on their tools for hours at a time. Additionally, the weight distribution of the tool has been optimized to enhance balance and control, making it easier to handle during intricate work.

The CS25/28 is equipped with several advanced technologies to enhance its cutting capabilities. For instance, it features a precision cutting blade that ensures clean and accurate cuts across various materials, including wood, metal, and plastic. The blade's design minimizes friction, which helps extend its lifespan and maintain cutting efficiency.

Another noteworthy technology is the tool's adjustable speed settings. This allows users to customize the cutting speed according to the material they are working with, providing flexibility and precision for different applications. The variable speed control ensures the best results whether engaging in delicate tasks or high-speed cutting.

Safety is paramount, and the CS25/28 comes with several integrated safety features. It includes a safety switch that prevents accidental startups, ensuring that the tool is only operational when the user intends it to be. Additionally, the sturdy blade guard offers added protection, making it safer for users during operation.

In conclusion, the Stanley Black & Decker CS25/28 is a versatile, powerful, and user-friendly tool that meets the needs of professionals across various industries. With its robust motor, advanced technologies, ergonomic design, and safety features, it stands as a reliable choice for anyone looking to invest in a high-quality cutting tool. Whether for construction, automotive repair, or DIY projects, the CS25/28 delivers exceptional performance and reliability.