Shindaiwa X7502831500, T344 manual Filling the fuel tank, After use, Minimize the Risk of Fire

Page 10

Mixing Instructions

1.Fill an approved fuel container with half of the required amount of gasoline.

2.Add the proper amount of engine oil to gasoline.

3.Close container and shake to mix oil with gasoline.

4.Add remaining gasoline, close fuel container, and remix.

IMPORTANT!

Spilled fuel is a leading cause of hydrocarbon emissions. Some states may require the use of automatic fuel shut- off containers to reduce fuel spillage.

After use

■■DO NOT store a unit with fuel in its tank. Leaks can occur. Return unused fuel to an approved fuel storage container.

Storage - Fuel storage laws vary by locality. Contact your local government for the laws affecting your area. As a precaution, store fuel in an approved, airtight con- tainer. Store in a well-ventilated, unoccupied building, away from sparks and flames.

IMPORTANT!

Stored fuel may separate. ALWAYS shake fuel container thoroughly before each use.

Filling the fuel tank

WARNING!

Minimize the Risk of Fire

■■NEVER smoke or light fires near the engine.

■■ALWAYS stop the engine and allow it to cool before refueling.

■■ALWAYS Wipe all spilled fuel and move at least 3 meters (10 feet) from the fueling point and source before starting.

■■NEVER place flammable material close to the engine muffler.

■■NEVER operate the engine without the muffler and spark arrester screen in place and in good working condition.

■■FUEL IS HIGHLY FLAMMABLE.

■■ALWAYS store gasoline in a container approved for flammable liquids.

■■ALWAYS inspect the unit for fuel leaks before each use. During each refill, check that no fuel leaks from around the fuel cap and/or fuel tank.

If fuel leaks are evident, stop using the unit immedi- ately. Fuel leaks must be repaired before using the unit.

■■ALWAYS move the unit at least 3 meters (10 feet) away from a fuel storage area or other readily flam- mable materials before starting

the engine.

1.Place the unit on a flat, level surface.

2.Clear any dirt or other debris from around the fuel filler cap.

CAUTION!

Slowly remove the fuel cap only after stopping the engine

3.Remove the fuel cap, and fill the tank with clean, fresh fuel.

4.Reinstall the fuel filler cap and tighten firmly.

5.Wipe away any spilled fuel before starting engine.

10

Page 9 Page 11
Image 10
Page 9 Page 11
Contents T344 Trimmer Contents IntroductionStay Alert SafetyWork Safely Use Good JudgmentSafety Labels Properly Equipped OperatorProduct Description Be Aware of the Working EnvironmentPrior to Assembly SpecificationsAssembly Emission Control Exhaust & EvaporativeCutting attachment shield Install trimmer headNylon line replacement To advance trimmer line TipFront handle installation Adjust throttle lever free playMixing Fuel Fuel RequirementsAfter use Filling the fuel tankMinimize the Risk of Fire Starting the Engine Checking Unit Condition When the Engine StartsStopping the Engine Starting a Flooded EngineOperation Maintenance Remove and clean or replace the spark plug Hour maintenance More frequently in dusty conditions10/15-Hour maintenance Hour maintenance Gear HousingHour maintenance Remove and replace the fuel filter element Hour Maintenance Valve AdjustmentSpark Arrester Screen Maintenance Carburetor AdjustmentLong Term Storage Idle Speed AdjustmentTrimmer head is now fully loaded and ready for operation Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Servicing Information Parts/Serial Number

T344, X7502831500 specifications

Shindaiwa T344 is a powerful, efficient trimmer designed for both professional landscapers and avid gardeners. This versatile tool is recognized for its reliability and performance, making it a popular choice in the outdoor power equipment market. One of its standout features is the 34.4cc two-stroke engine, which provides robust power while maintaining fuel efficiency. This engine allows the user to tackle tough weeds and overgrown grass with ease, ensuring a clean and precise cut every time.

One of the key technologies employed in the Shindaiwa T344 is its Easy Start system. This innovation provides a smooth starting experience with minimal effort. Users can start their trimmers with just a gentle pull, reducing wear on the starter mechanism and providing a more enjoyable overall user experience. The engine also features a digital ignition system, ensuring a consistent spark for reliable starts and optimal engine performance.

In addition to its powerful engine, the T344 is equipped with a lightweight design. The unit weighs in at only 11.5 lbs, making it easy to maneuver even during extended periods of use. This feature is particularly appreciated by professional users who require mobility and flexibility in their work.

The ergonomics of the Shindaiwa T344 are carefully engineered for comfort. The adjustable handle allows users to customize their grip, reducing fatigue and enhancing precision during operation. The anti-vibration system further contributes to user comfort by minimizing the vibrations transmitted to the operator's hands, enabling prolonged use without discomfort.

Another notable characteristic of the T344 is its heavy-duty cutting head, which is designed for durability and efficiency. The trimmer features a semi-automatic cutting line feed system that ensures a steady flow of line as you work, allowing for uninterrupted cutting and reducing downtime.

Overall, the Shindaiwa T344 trimmer combines advanced engineering, user-friendly features, and ergonomic design to deliver exceptional performance. With its powerful engine, lightweight construction, and focus on user comfort, this trimmer meets the demands of both professional landscapers and home gardeners alike, making it a top choice in the competitive outdoor power equipment market. Whether tackling residential lawns or commercial landscaping projects, the T344 proves to be a reliable and effective tool for achieving immaculate greenery.
Top Page Image Contents