Shindaiwa T344, X7502831500 manual Operation

Page 13

Operation

WARNING

Engine exhaust IS HOT, and contains Carbon Monoxide (CO), a poison gas. Breathing CO can cause uncon- sciousness, serious injury, or death. Exhaust can cause serious burns. ALWAYS position unit so that exhaust is directed away from your face and body.

Cutting grass with a trimmer head

Your Shindaiwa unit may be equipped with one of several Shindaiwa trimmer head models, each with features for specific applications and/or operational requirements.

NOTE:

For proper operation, always refer to the instructions accompanying the trim- mer head being used.

Trimmer head styles:

Semi-automatic. Trimmer line is indexed when the operator taps the trimmer head on the ground during operation.

Manual. The operator indexes line manually with the grass trimmer stopped.

Fixed. The operator must stop the unit and add new lengths of trimmer line manually.

Flail. This device, designed for clearing weeds and light brush, features three nylon blades attached to the head by pivots.

NOTE:

Additional hardware may be required to mount the Fixed Line or the Flail type trimmer heads.

Engine Operating Speeds

Operate at full throttle while cutting grass.

CAUTION!

Operation at low rpm can lead to premature clutch failure.

Trimming and Mowing Grass

Hold the grass trimmer so the trimmer head is angled slightly into the area to be cut. To ensure maximum trimmer-line service life, cut only with the tip of the trimmer line. Cut grass by swinging the unit's trimmer head from left to right. Keep the trimmer head horizontal.

Edging

Tilt the handle about 100° to the left (from horizontal) and move forward, holding the trimmer or brushcutter vertically as shown.

CAUTION!

■■Do not push the rotating line into trees, wire fences or any material that could tangle or break line ends.

■■Operation of trimmer without a cutting attachment shield and using exces- sive line length can lead to premature clutch failure.

■■Operation at low rpm can lead to premature clutch failure.

Tilt the handle about

100° to the left

13

Page 12 Page 14
Image 13
Page 12 Page 14
Contents T344 Trimmer Introduction ContentsWork Safely SafetyStay Alert Use Good JudgmentProperly Equipped Operator Safety LabelsBe Aware of the Working Environment Product DescriptionAssembly SpecificationsPrior to Assembly Emission Control Exhaust & EvaporativeNylon line replacement Install trimmer headCutting attachment shield To advance trimmer line TipAdjust throttle lever free play Front handle installationFuel Requirements Mixing FuelAfter use Filling the fuel tankMinimize the Risk of Fire Starting the Engine Stopping the Engine When the Engine StartsChecking Unit Condition Starting a Flooded EngineOperation Maintenance 10/15-Hour maintenance Hour maintenance More frequently in dusty conditionsRemove and clean or replace the spark plug Hour maintenance Gear HousingHour maintenance Remove and replace the fuel filter element Valve Adjustment Hour MaintenanceCarburetor Adjustment Spark Arrester Screen MaintenanceLong Term Storage Idle Speed AdjustmentTrimmer head is now fully loaded and ready for operation Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Parts/Serial Number Servicing Information

T344, X7502831500 specifications

Shindaiwa T344 is a powerful, efficient trimmer designed for both professional landscapers and avid gardeners. This versatile tool is recognized for its reliability and performance, making it a popular choice in the outdoor power equipment market. One of its standout features is the 34.4cc two-stroke engine, which provides robust power while maintaining fuel efficiency. This engine allows the user to tackle tough weeds and overgrown grass with ease, ensuring a clean and precise cut every time.

One of the key technologies employed in the Shindaiwa T344 is its Easy Start system. This innovation provides a smooth starting experience with minimal effort. Users can start their trimmers with just a gentle pull, reducing wear on the starter mechanism and providing a more enjoyable overall user experience. The engine also features a digital ignition system, ensuring a consistent spark for reliable starts and optimal engine performance.

In addition to its powerful engine, the T344 is equipped with a lightweight design. The unit weighs in at only 11.5 lbs, making it easy to maneuver even during extended periods of use. This feature is particularly appreciated by professional users who require mobility and flexibility in their work.

The ergonomics of the Shindaiwa T344 are carefully engineered for comfort. The adjustable handle allows users to customize their grip, reducing fatigue and enhancing precision during operation. The anti-vibration system further contributes to user comfort by minimizing the vibrations transmitted to the operator's hands, enabling prolonged use without discomfort.

Another notable characteristic of the T344 is its heavy-duty cutting head, which is designed for durability and efficiency. The trimmer features a semi-automatic cutting line feed system that ensures a steady flow of line as you work, allowing for uninterrupted cutting and reducing downtime.

Overall, the Shindaiwa T344 trimmer combines advanced engineering, user-friendly features, and ergonomic design to deliver exceptional performance. With its powerful engine, lightweight construction, and focus on user comfort, this trimmer meets the demands of both professional landscapers and home gardeners alike, making it a top choice in the competitive outdoor power equipment market. Whether tackling residential lawns or commercial landscaping projects, the T344 proves to be a reliable and effective tool for achieving immaculate greenery.
Top Page Image Contents