Shindaiwa X7502831500, T344 Stopping the Engine, Checking Unit Condition, When the Engine Starts

Page 12

6.When the engine starts, slowly move the choke lever to the “OPEN” posi- tion. (If the engine stops after the initial start, close the choke and restart.)

7.Operating the throttle will automatically disengage the fast idle setting.

IMPORTANT!

If the engine fails to start after several attempts with the choke in the closed position, the engine may be flooded with fuel. If flooding is suspected, refer to the ”Starting a Flooded Engine” section of this manual.

When the Engine Starts...

Open

After engine starts, move choke to OPEN position

■■After the engine starts, allow the engine to warm up at idle 2 or 3 minutes before operating the unit. ■■After the engine is warm, pick up the unit and clip on the shoulder strap, if so equipped.

■■Advancing the throttle makes the cutting attachment move faster; releasing the throttle permits the attachment to stop moving. If the cutting attachment continues to move when the engine returns to idle, carburetor idle speed should be adjusted (see “Adjusting Engine Idle”).

Starting A Flooded Engine

1.Slide the ignition switch to the “I” (ON) position.

2.Open the choke, put the throttle lever in the full throttle position, then clear excess fuel from the combustion chamber by cranking the engine several times.

3.If the engine still fails to start or fire, refer to the troubleshooting flow chart at the end of this manual.

Stopping the Engine

Idle the engine briefly before stopping (about 2 minutes), then slide the igni- tion switch to the “O” (Engine OFF) position.

OFF

Checking Unit Condition

Slide ignition to OFF

NEVER operate the unit with the cutting attachment shield or other protec- tive devices removed!

Use only authorized Shindaiwa parts and accessories with your Shindaiwa trimmer. Do not make modifications to this unit without written approval from Shindaiwa, Inc.

ALWAYS make sure the cutting attachment is properly installed and firmly tightened before operation.

NEVER use a cracked or warped cutting attachment; replace it with a serviceable one.

ALWAYS make sure the cutting attachment fits properly into the appropri- ate attachment holder. If a properly installed attachment vibrates, replace the attachment with new one and re-check.

ALWAYS stop the engine immediately and check for damage if you strike a foreign object or if the unit becomes tangled. Do not operate with broken or damaged equipment.

NEVER allow the engine to run at high RPM without a load. Doing so could dam- age the engine.

NEVER operate a unit with worn or dam- aged fasteners or attachment holders.

WARNING!

A cutting attachment shield or other protective device is no guaran- tee of protection against ricochet. YOU MUST ALWAYS GUARD AGAINST FLYING DEBRIS!

12

Page 11 Page 13
Image 12
Page 11 Page 13
Contents T344 Trimmer Contents IntroductionSafety Work SafelyStay Alert Use Good JudgmentSafety Labels Properly Equipped OperatorProduct Description Be Aware of the Working EnvironmentSpecifications AssemblyPrior to Assembly Emission Control Exhaust & EvaporativeInstall trimmer head Nylon line replacementCutting attachment shield To advance trimmer line TipFront handle installation Adjust throttle lever free playMixing Fuel Fuel RequirementsFilling the fuel tank After useMinimize the Risk of Fire Starting the Engine When the Engine Starts Stopping the EngineChecking Unit Condition Starting a Flooded EngineOperation Maintenance Hour maintenance More frequently in dusty conditions 10/15-Hour maintenanceRemove and clean or replace the spark plug Hour maintenance Gear HousingHour maintenance Remove and replace the fuel filter element Hour Maintenance Valve AdjustmentSpark Arrester Screen Maintenance Carburetor AdjustmentIdle Speed Adjustment Long Term StorageTrimmer head is now fully loaded and ready for operation Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Servicing Information Parts/Serial Number

T344, X7502831500 specifications

Shindaiwa T344 is a powerful, efficient trimmer designed for both professional landscapers and avid gardeners. This versatile tool is recognized for its reliability and performance, making it a popular choice in the outdoor power equipment market. One of its standout features is the 34.4cc two-stroke engine, which provides robust power while maintaining fuel efficiency. This engine allows the user to tackle tough weeds and overgrown grass with ease, ensuring a clean and precise cut every time.

One of the key technologies employed in the Shindaiwa T344 is its Easy Start system. This innovation provides a smooth starting experience with minimal effort. Users can start their trimmers with just a gentle pull, reducing wear on the starter mechanism and providing a more enjoyable overall user experience. The engine also features a digital ignition system, ensuring a consistent spark for reliable starts and optimal engine performance.

In addition to its powerful engine, the T344 is equipped with a lightweight design. The unit weighs in at only 11.5 lbs, making it easy to maneuver even during extended periods of use. This feature is particularly appreciated by professional users who require mobility and flexibility in their work.

The ergonomics of the Shindaiwa T344 are carefully engineered for comfort. The adjustable handle allows users to customize their grip, reducing fatigue and enhancing precision during operation. The anti-vibration system further contributes to user comfort by minimizing the vibrations transmitted to the operator's hands, enabling prolonged use without discomfort.

Another notable characteristic of the T344 is its heavy-duty cutting head, which is designed for durability and efficiency. The trimmer features a semi-automatic cutting line feed system that ensures a steady flow of line as you work, allowing for uninterrupted cutting and reducing downtime.

Overall, the Shindaiwa T344 trimmer combines advanced engineering, user-friendly features, and ergonomic design to deliver exceptional performance. With its powerful engine, lightweight construction, and focus on user comfort, this trimmer meets the demands of both professional landscapers and home gardeners alike, making it a top choice in the competitive outdoor power equipment market. Whether tackling residential lawns or commercial landscaping projects, the T344 proves to be a reliable and effective tool for achieving immaculate greenery.
Top Page Image Contents