Shindaiwa T344, X7502831500 manual Long Term Storage, Idle Speed Adjustment

Page 19

Maintenance (continued)

Adjusting Engine Idle

The engine must return to idle speed whenever the throttle lever is released. Idle speed is adjustable, and must be set low enough to permit the engine clutch to disengage the cutting attachment.

WARNING!

The cutting attachment must NEVER rotate at engine idle! If the idle speed cannot be adjusted by the procedure described here, return the unit to your Shindaiwa dealer for inspection.

Idle Speed Adjustment

1.Place the unit on the ground, then start the engine, and then allow it to idle 2-3 minutes until warm.

2.If the attachment rotates when the engine is at idle, reduce the idle speed by turning the idle adjustment screw counter-clockwise.

3.If a tachometer is available, adjust idle. Check Specifications page for correct idle speed

Idle

Ajust- ment

Screw

Loading Trimmer Line

1.Cut one piece of line to recommended length.

2.Align arrows on top of knob with openings in eyelets.

3.Insert one end of trimmer line into an eyelet, and push line equal distance through trimmer head.

4.Hold trimmer head while turning knob clockwise to wind line onto spool until about 5” (13 cm) of each line remains exposed.

Trimmer head is now fully loaded and ready for operation.

1

2

.080 (2.0 mm) dia. - 20’ (6 m)

.095 (2.4 mm) dia. - 14’ (4 m)

.105 (2.7 mm) dia. - 10’ (3 m)

3

4

Long Term Storage

Whenever the unit will not be used for 30 days or longer, use the following proce- dures to prepare it for storage:

■■Clean external parts thoroughly and apply a light coating of oil to all metal surfaces.

■■Drain all the fuel from the carburetor and the fuel tank.

To do so:

1.Prime the primer bulb until no more fuel is passing through.

2.Start and run the engine until it stops running.

3.Repeat steps 1 and 2 until the engine will no longer start.

CAUTION!

Gasoline stored in the carbure-

tor for extended periods can cause hard starting, and could also lead to increased service and maintenance costs.

IMPORTANT!

All stored fuels should be stabilized with a fuel stabilizer such as STA-BIL™.

NOTE:

Damage resulting from stale or con- taminated fuel is not covered by the Shindaiwa warranty policy.

■■Remove the spark plug and pour about 1/4 oz. of engine oil into the cylinder through the spark plug hole. Slowly pull the recoil starter 2 or

3 times so oil will evenly coat the interior of the engine. Reinstall the spark plug.

■■Before storing the unit, repair or replace any worn or damaged parts.

■■Remove the air cleaner element from the carburetor and clean it thor- oughly with soap and water. Let dry and reassemble the element.

■■Store the unit in a clean, dust-free area.

19

Page 18 Page 20
Image 19
Page 18 Page 20
Contents T344 Trimmer Introduction ContentsUse Good Judgment SafetyWork Safely Stay AlertProperly Equipped Operator Safety LabelsBe Aware of the Working Environment Product DescriptionEmission Control Exhaust & Evaporative SpecificationsAssembly Prior to AssemblyTo advance trimmer line Tip Install trimmer headNylon line replacement Cutting attachment shieldAdjust throttle lever free play Front handle installationFuel Requirements Mixing FuelAfter use Filling the fuel tankMinimize the Risk of Fire Starting the Engine Starting a Flooded Engine When the Engine StartsStopping the Engine Checking Unit ConditionOperation Maintenance Hour maintenance Gear Housing Hour maintenance More frequently in dusty conditions10/15-Hour maintenance Remove and clean or replace the spark plugHour maintenance Remove and replace the fuel filter element Valve Adjustment Hour MaintenanceCarburetor Adjustment Spark Arrester Screen MaintenanceLong Term Storage Idle Speed AdjustmentTrimmer head is now fully loaded and ready for operation Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 01/2010 Page Page Parts/Serial Number Servicing Information

T344, X7502831500 specifications

Shindaiwa T344 is a powerful, efficient trimmer designed for both professional landscapers and avid gardeners. This versatile tool is recognized for its reliability and performance, making it a popular choice in the outdoor power equipment market. One of its standout features is the 34.4cc two-stroke engine, which provides robust power while maintaining fuel efficiency. This engine allows the user to tackle tough weeds and overgrown grass with ease, ensuring a clean and precise cut every time.

One of the key technologies employed in the Shindaiwa T344 is its Easy Start system. This innovation provides a smooth starting experience with minimal effort. Users can start their trimmers with just a gentle pull, reducing wear on the starter mechanism and providing a more enjoyable overall user experience. The engine also features a digital ignition system, ensuring a consistent spark for reliable starts and optimal engine performance.

In addition to its powerful engine, the T344 is equipped with a lightweight design. The unit weighs in at only 11.5 lbs, making it easy to maneuver even during extended periods of use. This feature is particularly appreciated by professional users who require mobility and flexibility in their work.

The ergonomics of the Shindaiwa T344 are carefully engineered for comfort. The adjustable handle allows users to customize their grip, reducing fatigue and enhancing precision during operation. The anti-vibration system further contributes to user comfort by minimizing the vibrations transmitted to the operator's hands, enabling prolonged use without discomfort.

Another notable characteristic of the T344 is its heavy-duty cutting head, which is designed for durability and efficiency. The trimmer features a semi-automatic cutting line feed system that ensures a steady flow of line as you work, allowing for uninterrupted cutting and reducing downtime.

Overall, the Shindaiwa T344 trimmer combines advanced engineering, user-friendly features, and ergonomic design to deliver exceptional performance. With its powerful engine, lightweight construction, and focus on user comfort, this trimmer meets the demands of both professional landscapers and home gardeners alike, making it a top choice in the competitive outdoor power equipment market. Whether tackling residential lawns or commercial landscaping projects, the T344 proves to be a reliable and effective tool for achieving immaculate greenery.
Top Page Image Contents