Shindaiwa C254 manual Hour maintenance More frequently in dusty conditions, 10/15-Hour maintenance

Page 17

Maintenance (continued)

10-Hour maintenance

(more frequently in dusty conditions)

1.Remove the air filter cover by loos- ening the cover screw(s) and lifting.

2.Remove and inspect the pre-filter. If the pre-filter is torn or otherwise damaged, replace it with a new one.

3.Clean the pre-filter with soap and water. Let dry before reinstalling.

4.Inspect the air filter element. If the element is damaged or distorted, replace it with a new one.

5.Tap filter gently on a hard surface to dislodge debris from element or use compressed air from the inside to blow debris out and away from the air filter element.

6.Install the air filter element, pre-filter and cover in the reverse order of removal.

10/15-Hour maintenance

Loosen

fasteners

Remove the cover of the air filter

IMPORTANT!

Direct the air stream at the inside face of the filter only!

Prefilter

Filter element

Components of air filter

CAUTION!

Never operate the unit if the air cleaner assembly is damaged or missing!

Remove and clean or replace the spark plug.

■■Clean the spark plug. Adjust elec- trode gap according to the values listed in the ”Specifications” section. If the spark plug must be replaced, use only the type recommended in ”Spec- ifications” or equivalent resistor type spark plug of the correct heat range.

CAUTION!

Before removing the spark plug, clean the area around the plug to prevent dirt and debris from getting into the engine’s internal parts.

Clean the spark

plug and check

the gap at the

electrode.

0,6 mm

Remove and inspect spark plug

50-hour maintenance

Gearcase lubrication

1.Clean all loose debris from gear box.

2.Remove plug (A) and check level of grease. Grease should fill gear case to bottom of grease plug hole.

3.Add grease if necessary using manual grease gun or squeeze-type tube.

Do not use high pressure grease gun. DO NOT over-fill.

A

17

Page 16 Page 18
Image 17
Page 16 Page 18
Contents C254 Brushcutter Introduction ContentsSafety Labels SafetyWork Safely Stay AlertBe Aware of the Working Environment Properly Equipped OperatorProduct Description SpecificationsPrior to Assembly AssemblyHandlebar Assembly Install the handlebar Emission Control Exhaust & EvaporativeNylon line replacement Install trimmer headCutting attachment shield To advance trimmer line TipInstall Metal Shield Blade InstallationInstall Blade Fuel Requirements Mixing FuelMinimize the Risk of Fire Filling the fuel tankAfter use Press primer bulb Starting the EngineOperation Stopping the EngineChecking Unit Condition Trimmer head styles Cutting grass with a trimmer headEngine Operating Speeds Trimming and Mowing GrassBlade Thrust Using a bladeBrushcutter Handlebar Brushcutter Shoulder StrapMaintenance 10/15-Hour maintenance Hour maintenance More frequently in dusty conditionsRemove and clean or replace the spark plug Hour maintenance Gearcase lubricationValve Adjustment Hour maintenance Remove and replace the fuel filter elementHour Maintenance Muffler and spark arrester maintenance Carburetor AdjustmentEngine Break-In High Altitude OperationIdle Speed Adjustment Adjusting Engine IdleBlade Sharpening Multiple-tooth Circular BladeLong Term Storage Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 99922201033 Page Page Page Page T10512001001/T10512999999 Servicing InformationT10611001001/T10611999999

C254, X7502825601 specifications

The Shindaiwa X7502825601 C254 is a robust and versatile brush cutter designed for both professional landscapers and passionate garden enthusiasts alike. Known for its high performance and durability, this powerful tool seamlessly combines advanced technology with user-friendly features, making it a go-to choice for tackling tough jobs.

One of the main features of the Shindaiwa C254 is its impressive engine. Equipped with a 25.4cc two-stroke engine, this brush cutter delivers ample power while remaining lightweight, making it easy to maneuver and handle for extended periods. The engine’s design emphasizes fuel efficiency without compromising performance, allowing users to complete their tasks effectively and save on fuel costs.

The C254 is also recognized for its innovative Easy Start technology. This system minimizes the effort required to start the machine, enabling users to get to work quickly without the frustration of cumbersome starting rituals. The low vibration design significantly enhances comfort, reducing user fatigue during extended use and ensuring increased productivity.

The brush cutter features an ergonomic handle with a comfortable grip, designed with the user in mind. The two-hand operation allows for better control, especially when navigating through dense vegetation or uneven terrain. Its lightweight construction further aids in handling, making it suitable for prolonged use without strain.

In terms of versatility, the Shindaiwa C254 comes equipped with detachable cutting attachments, including a blade and a trimmer head. This allows users to switch between heavy-duty cutting and precise trimming with ease, making it suitable for a wide range of landscaping tasks—from clearing thick brush to edging lawns.

Durability is another hallmark of the C254. Constructed with high-quality materials, this brush cutter is built to withstand the rigors of tough outdoor environments. Additionally, Shindaiwa offers a strong warranty and reliable service options, ensuring peace of mind for users.

In conclusion, the Shindaiwa X7502825601 C254 stands out in the brush cutter market with its powerful engine, user-friendly features, and exceptional versatility. Whether you are a professional landscaper or a dedicated DIY gardener, the C254 offers reliable performance, making yard work more efficient and enjoyable.
Top Page Image Contents