Shindaiwa C254, X7502825601 manual 99922201033

Page 27

ECHO INCORPORATED EMISSION CONTROL WARRANTY STATEMENT

FOR ECHO AND SHINDAIWA BRANDS

The Environmental Protection Agency (EPA) and the California Air Resources Board (C.A.R.B.) and ECHO Incorporated (ECHO Inc.) are pleased to explain the emission control system warranty on your 2010 and later equipment/small off-road engine (SORE). New equipment/SORE must be designed, built and equipped to meet stringent EPA and C.A.R.B. anti-smog standards. ECHO Inc. must warrant the emission control system on your equipment/SORE for the periods of time listed below, provided there has been no abuse, neglect or improper maintenance of your equipment/ SORE. Your emission control system may include parts such as: carburetor, fuel-injection system, ignition system, catalytic converter/muffler, fuel tank, fuel feed lines, fuel cap assembly, spark plug, air filters, and other associated components. Where a warrantable condition exists, ECHO Inc will repair your equipment/SORE at no cost to you including diagnosis, parts and labor. The Emission Control System warranty is extended to the original owner including all subsequent owners.

MANUFACTURER'S WARRANTY COVERAGE:

The emission control system is warranted for 2 years or the length of the ECHO Inc. warranty, whichever is longer. If any emission-related part on your equipment is defective, the part will be repaired or replaced by ECHO Inc. or its Authorized Service Representative.

OWNER'S WARRANTY RESPONSIBILITIES:

As the equipment/SORE owner, you are responsible for the performance of the required maintenance listed in your Operator's Manual. ECHO Inc. recommends that you retain all receipts covering maintenance on your equipment/SORE however, ECHO Inc. cannot deny warranty solely for the lack of receipts or for your failure to ensure the performance of all scheduled maintenance. As the equipment/SORE owner, you should be aware that ECHO Inc. may deny you warranty coverage if your equipment/SORE or a part has failed due to abuse, neglect, improper maintenance or unapproved modifications.

You are responsible for presenting your equipment/SORE to an ECHO Inc. authorized service representative as soon as a problem exists. The warranty repairs should be completed in a reasonable amount of time, not to exceed 30 days. If a warrantable condition exists and there is no Authorized Dealer within 100 miles, ECHO Inc. will pay to ship the unit to the nearest authorized dealer. If you have questions regarding your warranty coverage, you should contact ECHO Inc. at 1-800-673-1558, web site WWW.ECHO-USA.COM or contact Shindaiwa at 1-877-986- 7783, web site WWW.SHINDAIWA.COM.

WHAT DOES THIS WARRANTY COVER?

ECHO Inc. warrants that your equipment/SORE was designed, built and equipped to conform with applicable EPA and C.A.R.B. emissions standards and that your equipment/SORE is free from defects in material and workmanship that would cause it to fail to conform with applicable requirements for 2 years or the length of the ECHO Inc. warranty, whichever is longer. The warranty period begins on the date the product is purchased by an end user.

HOW WILL A COVERED PART BE CORRECTED?

If there is a defect in a part covered by this warranty, any ECHO Inc. Authorized Service Dealer will correct the defect. You will not have to pay anything to have the part adjusted, repaired or replaced. This includes any labor and diagnosis for warranted repairs performed by the dealer. In addition, engine parts not expressly covered under this warranty but whose failure is a result of a failure of a covered part will be warranted.

WHAT PARTS ARE COVERED?

Any applicable emission related part not scheduled for "required maintenance" will be repaired or replaced within the warranty period. The repaired or replaced part will be warranted for the remaining ECHO Inc. warranty period.

Any warranted part that is scheduled only for regular inspection in the written instructions supplied is warranted for the warranty period stated above. Any such part repaired or replaced under warranty will be warranted for the remaining ECHO Inc. warranty period.

Any emission related part scheduled for replacement during "required maintenance" is warranted for the period of time prior to the first scheduled replacement point for that part. Any such part repaired or replaced under warranty shall be warranted for the remainder of the period prior to the first scheduled replacement point for that part.

Any manufacturer-approved replacement part may be used in the performance of any warranty maintenance or repairs on emission related parts, and must be provided without charge if the part is still under warranty.

Any replacement part that is equivalent in performance and durability may be used in non-warranty maintenance or repairs, and shall not reduce the warranty obligations of the manufacturer.

Throughout the equipment/SORE warranty period, ECHO Inc. will maintain a supply of warranted parts sufficient to meet the expected demand for such parts.

SPECIFIC EMISSION RELATED WARRANTED PARTS:

 

• Electronic Ignition System

• Spark Plug

• Catalytic Converter / Muffler Assembly

• Carburetor (complete assembly or replaceable components)

• Choke

• Fuel-Injection Assembly (or replaceable components)

• Fuel Tank

• Fuel Cap Assembly

• Air Filter

• Fuel Feed Line (and associated clamps/connectors as applicable)

WHAT IS NOT COVERED?

Any failure caused by abuse, neglect, improper maintenance, unapproved modifications, use of unapproved add-on parts/modified parts or unapproved accessories.

This Emission Control Warranty is valid only for the U.S.A., it's Territories, and Canada.

99922201033

 

01/2010

27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents C254 Brushcutter Introduction ContentsStay Alert SafetySafety Labels Work SafelyBe Aware of the Working Environment Properly Equipped OperatorProduct Description SpecificationsEmission Control Exhaust & Evaporative AssemblyPrior to Assembly Handlebar Assembly Install the handlebarTo advance trimmer line Tip Install trimmer headNylon line replacement Cutting attachment shieldInstall Metal Shield Blade InstallationInstall Blade Fuel Requirements Mixing FuelFilling the fuel tank After useMinimize the Risk of Fire Press primer bulb Starting the EngineStopping the Engine Checking Unit ConditionOperation Trimming and Mowing Grass Cutting grass with a trimmer headTrimmer head styles Engine Operating SpeedsBrushcutter Shoulder Strap Using a bladeBlade Thrust Brushcutter HandlebarMaintenance Hour maintenance Gearcase lubrication Hour maintenance More frequently in dusty conditions10/15-Hour maintenance Remove and clean or replace the spark plugHour maintenance Remove and replace the fuel filter element Hour MaintenanceValve Adjustment High Altitude Operation Carburetor AdjustmentMuffler and spark arrester maintenance Engine Break-InMultiple-tooth Circular Blade Adjusting Engine IdleIdle Speed Adjustment Blade SharpeningLong Term Storage Possible Cause Troubleshooting GuideIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 99922201033 Page Page Page Page Servicing Information T10611001001/T10611999999T10512001001/T10512999999

C254, X7502825601 specifications

The Shindaiwa X7502825601 C254 is a robust and versatile brush cutter designed for both professional landscapers and passionate garden enthusiasts alike. Known for its high performance and durability, this powerful tool seamlessly combines advanced technology with user-friendly features, making it a go-to choice for tackling tough jobs.

One of the main features of the Shindaiwa C254 is its impressive engine. Equipped with a 25.4cc two-stroke engine, this brush cutter delivers ample power while remaining lightweight, making it easy to maneuver and handle for extended periods. The engine’s design emphasizes fuel efficiency without compromising performance, allowing users to complete their tasks effectively and save on fuel costs.

The C254 is also recognized for its innovative Easy Start technology. This system minimizes the effort required to start the machine, enabling users to get to work quickly without the frustration of cumbersome starting rituals. The low vibration design significantly enhances comfort, reducing user fatigue during extended use and ensuring increased productivity.

The brush cutter features an ergonomic handle with a comfortable grip, designed with the user in mind. The two-hand operation allows for better control, especially when navigating through dense vegetation or uneven terrain. Its lightweight construction further aids in handling, making it suitable for prolonged use without strain.

In terms of versatility, the Shindaiwa C254 comes equipped with detachable cutting attachments, including a blade and a trimmer head. This allows users to switch between heavy-duty cutting and precise trimming with ease, making it suitable for a wide range of landscaping tasks—from clearing thick brush to edging lawns.

Durability is another hallmark of the C254. Constructed with high-quality materials, this brush cutter is built to withstand the rigors of tough outdoor environments. Additionally, Shindaiwa offers a strong warranty and reliable service options, ensuring peace of mind for users.

In conclusion, the Shindaiwa X7502825601 C254 stands out in the brush cutter market with its powerful engine, user-friendly features, and exceptional versatility. Whether you are a professional landscaper or a dedicated DIY gardener, the C254 offers reliable performance, making yard work more efficient and enjoyable.
Top Page Image Contents