Shindaiwa X7502825601, C254 manual Emission Control Exhaust & Evaporative, Prior to Assembly

Page 6

Emission Control (Exhaust & Evaporative)

EPA 2010 and Later and/or C.A.R.B. TIER III

The emission control system for the engine is EM/TWC (Engine Modification and 3-way Catalyst) and for the fuel tank the Control System is EVAP (Evaporative Emissions) or N (for nylon tank). Evaporative emission may be applicable to California models only.

An Emission Control Label is located on the unit. (This is an EXAMPLE ONLY; information on label varies by en- gine FAMILY).

PRODUCT EMISSION DURABILITY (EMISSION COMPLIANCE PERIOD)

The 300 hour emission compliance period is the time span selected by the manufacturer certifying the engine emissions output meets applicable emissions regulations, provided that approved maintenance procedures are followed as listed in the Maintenance Section of this manual.

Assembly

This unit comes fully assembled with the exception of the handlebar, cut- ting attachment shield and cutting attachment.

IMPORTANT!

The terms “left”, “left-hand”, and “LH”; “right”, “right-hand”, and “RH”; “front” and “rear” refer to directions as viewed by the operator during normal

Prior to Assembly

Before assembling, make sure you have all the components required for a complete unit and inspect unit and components for any damage.

■■Engine/Outer tube assembly

■■Handlebar and Throttle assembly ■■Cutting attachment shields

■■Cutting Attachment

■■Shoulder Strap w/Hip Pad

■■Cutting attachment shield mounting brackets and assembly hardware

■■Cutting attachment adapter plates

■■4 mm hex key wrench (Also use as a locking tool)

operation.

Handlebar Assembly

Install the handlebar:

1.Remove four (4) upper cap retaining screws, and remove upper cap from handlebar mounting bracket.

2.Place handlebar on mounting bracket, and secure with upper cap and four (4) screws.

3.Adjust handlebar position for best operator comfort and control, then tighten upper and lower cap retain- ing screws securely.

4.Secure cable to outer tube with two

(2) bands provided.

 

 

■■T-wrench

 

Throttle lock

Ignition switch

 

 

 

 

button

 

 

 

 

 

Throttle interlock

 

Throttle

 

 

 

trigger

 

Handlebar

 

Throttle

 

Handle bar

 

 

Upper cap

Assembly

 

 

 

retaining screws

 

Handle positioning

Upper

Hanger

 

label

cap

 

Outer tube

 

 

 

Lower cap

 

 

 

retaining

 

 

 

screws

 

Bands

 

 

 

 

 

Lower cap

Mounting the brushcutter handlebar

 

 

6

Page 5 Page 7
Image 6
Page 5 Page 7
Contents C254 Brushcutter Contents IntroductionWork Safely SafetySafety Labels Stay AlertProperly Equipped Operator Be Aware of the Working EnvironmentSpecifications Product DescriptionHandlebar Assembly Install the handlebar AssemblyPrior to Assembly Emission Control Exhaust & EvaporativeCutting attachment shield Install trimmer headNylon line replacement To advance trimmer line TipBlade Installation Install Metal ShieldInstall Blade Mixing Fuel Fuel RequirementsFilling the fuel tank After useMinimize the Risk of Fire Starting the Engine Press primer bulbStopping the Engine Checking Unit ConditionOperation Engine Operating Speeds Cutting grass with a trimmer headTrimmer head styles Trimming and Mowing GrassBrushcutter Handlebar Using a bladeBlade Thrust Brushcutter Shoulder StrapMaintenance Remove and clean or replace the spark plug Hour maintenance More frequently in dusty conditions10/15-Hour maintenance Hour maintenance Gearcase lubricationHour maintenance Remove and replace the fuel filter element Hour MaintenanceValve Adjustment Engine Break-In Carburetor AdjustmentMuffler and spark arrester maintenance High Altitude OperationBlade Sharpening Adjusting Engine IdleIdle Speed Adjustment Multiple-tooth Circular BladeLong Term Storage Troubleshooting Guide Possible CauseIs the engine overheating? Symptom Possible Cause Remedy Exceptions Purchased Repair Parts and Accessories 99922201033 Page Page Page Page Servicing Information T10611001001/T10611999999T10512001001/T10512999999

C254, X7502825601 specifications

The Shindaiwa X7502825601 C254 is a robust and versatile brush cutter designed for both professional landscapers and passionate garden enthusiasts alike. Known for its high performance and durability, this powerful tool seamlessly combines advanced technology with user-friendly features, making it a go-to choice for tackling tough jobs.

One of the main features of the Shindaiwa C254 is its impressive engine. Equipped with a 25.4cc two-stroke engine, this brush cutter delivers ample power while remaining lightweight, making it easy to maneuver and handle for extended periods. The engine’s design emphasizes fuel efficiency without compromising performance, allowing users to complete their tasks effectively and save on fuel costs.

The C254 is also recognized for its innovative Easy Start technology. This system minimizes the effort required to start the machine, enabling users to get to work quickly without the frustration of cumbersome starting rituals. The low vibration design significantly enhances comfort, reducing user fatigue during extended use and ensuring increased productivity.

The brush cutter features an ergonomic handle with a comfortable grip, designed with the user in mind. The two-hand operation allows for better control, especially when navigating through dense vegetation or uneven terrain. Its lightweight construction further aids in handling, making it suitable for prolonged use without strain.

In terms of versatility, the Shindaiwa C254 comes equipped with detachable cutting attachments, including a blade and a trimmer head. This allows users to switch between heavy-duty cutting and precise trimming with ease, making it suitable for a wide range of landscaping tasks—from clearing thick brush to edging lawns.

Durability is another hallmark of the C254. Constructed with high-quality materials, this brush cutter is built to withstand the rigors of tough outdoor environments. Additionally, Shindaiwa offers a strong warranty and reliable service options, ensuring peace of mind for users.

In conclusion, the Shindaiwa X7502825601 C254 stands out in the brush cutter market with its powerful engine, user-friendly features, and exceptional versatility. Whether you are a professional landscaper or a dedicated DIY gardener, the C254 offers reliable performance, making yard work more efficient and enjoyable.
Top Page Image Contents