Servis-Rhino 2410 Pre-Operation Inspection and Service, Tractor Pre-Operation Inspection/Service

OPERATION

6. Pre-Operation Inspection and Service

Periodically inspect all moving parts for wear and replace when necessary with authorized service parts. Look for loose fasteners, worn or broken parts, and leaky or loose fittings. Make sure all pins have cotter pins and washers. Serious injury may occur from not maintaining this machine in good working order.

Before each use, a pre-operation inspection and service of the implement and tractor must be performed. This includes routine maintenance and scheduled lubrication, inspecting that all safety devices are equipped and functional, and performing needed repairs. DO NOT operate the unit if the pre-operation inspection reveals any condition affecting safe operation. Perform repairs and replacement of damaged and missing parts as soon as noticed. By performing a thorough pre-operation inspection and service, valuable down time and repair cost can be avoided. OPS-L-0026

6.1 Tractor Pre-Operation Inspection/Service

Refer to the tractor operator’s manual to ensure a complete pre-operation inspection and scheduled service is performed according to the manufacturers recommendations. The following are some of the items that require daily service and inspection:

•Tire condition/air pressure

•Wheel lug bolts

•Steering linkage

•PTO shield

•SMV sign is clean and visible

•Tractor’s lights are clean and functional

•Tractor Seat belt is in good condition

•Tractor ROPS is in good condition

•ROPS is in the raised position

•No tractor oil leaks

•Radiator free of debris

•Engine oil level and condition

•Engine coolant level and condition

•Power brake fluid level

•Power steering fluid level

•Fuel condition and level

•Sufficient lubrication at all lube points

•Air filter condition OPS-U-0030

© 2010 Alamo Group Inc.

OPERATION