Servis-Rhino 4211B manual Standard Equipment and Specifications

OPERATION

1.Standard Equipment and Specifications

Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given for a loader equipped with 72” HD material bucket, quick attach device and 4-bar linkage, operated with an average tractor hydraulic system of 16.5 GPM with engine operating at 2300 RPM and control valve relief setting of 2900 PSI.

Breakaway Capacity
At Pivot Point		5790 lbs.
800mm Forward of Pivot Point		3875 lbs.
Lift capacity at Full Height
At Pivot Point		3065 lbs.
800mm Forward of Pivot Point		2085 lbs.
Raising Time		4.40 sec.
Lowering Time		3.30 sec.
Attachment Dumping Time		3.40 sec.
Attachment Rollback Time		2.30 sec.
Weight with HD Material Bucket		1883 lbs.
Lift Cylinder:
Stroke		19.72 in.
Piston Diameter		2.75 in.
Rod Diameter		1.50 in.
Bucket Cylinder:
Stroke		21.69 in.
Piston Diameter		2.50 in.
Rod Diameter		1.38 in.
A. Maximum Lift Height at Pivot Pin		131 in.
B. Maximum Height Under Bucket		123 in.
C. Clearance with Bucket Dumped		97 in.
D. Reach at Maximum Height		35 in.
E.	Maximum Dump Angle	60°
F.	Reach with Attachment on Ground	83 in.
G.	Attachment Rollback Angle	40°
H.	Digging Depth	4 in.
I. Overall Height in Carry Position		67 in.

(Manufacturers estimated specifications and design subject to change without notice.)

4211B 02/10 Operation Section 4-3

© 2010 Alamo Group Inc.

OPERATION