Sunbeam FA7500 manual Using the auto off timer, Using the oscillation function

Page 12

Using Your Tower Fan (continued)

Using the auto off timer

The auto off timer automatically switches the fan off after a preset number of hours.

To activate this feature, simply press the auto

off button on the tower or on the remote control unit.

1.Press the auto off button once to switch the fan off after 2 hours. The timing light on the tower will turn red.

2.Press the auto off button again to have the fan switch after 4 hours. The timing light on the tower will turn orange.

3.Press the auto off button once more to have the fan switch after 8 hours. The timing light on the tower will turn green.

To cancel the setting, keep pressing the auto off button until it cycles past 8 hours and returns to its normal setting. The auto off timer will be deactivated, the timing light will be off, and the fan will remain on until it is switched off manually.

Using the oscillation function

The 70 degree oscillation function can be used on any setting.

1.Turn the unit on and select any fan speed.

2.Press the button on the tower or the remote. The button will illuminate and the fan will begin to oscillate from side to side.

To stop the fan from oscillating, simply press the button once again.

10

Image 12
Contents Sunbeam Brushed Remote Control Tower Fan Contents Sunbeam’s Safety Precautions Safety Precautions For Your Tower Fan Important Instructions Retain For Future UseLocating Your Tower Fan Always locate your fan on a flat level surfaceFeatures Of Your Sunbeam Tower Fan Remote control storagePower button Carry handleNature mode Remote controlFan speed button Auto Off buttonAssembling Your Tower Fan Remove the screws from beneath the towerLower the tower onto the base Screw the tower to the base Clip the cord into placeUsing Your Tower Fan Switching the fan onSwitching the fan off Selecting a fan speed settingUsing the remote control Changing the batteriesUsing the auto off timer Using the oscillation functionPress the button on either the fan or Remote. Troubleshooting Guide Care And CleaningIf your remote control fails to operate check the following If your tower fan fails to operate check the followingYear Replacement Guarantee Sunbeam Service CentresAustralia New ZealandConsumer Hotline