Sunbeam FA7500 manual Troubleshooting Guide, Care And Cleaning

Page 14

Troubleshooting Guide

If your tower fan fails to operate check the following:

Make sure the electrical outlet or circuit breaker is working.

Check for obstructions around the air intake grill.

If your remote control fails to operate check the following:

Ensure that you point the remote towards the front of the fan.

Check that the batteries are not worn. Replace if necessary.

Care And Cleaning

Ensure that your fan is switched off and disconnected from the power outlet before cleaning.

Carefully wipe your fan using a clean cloth. Do not use abrasive cleaners or brushes to clean the appliance as these may scratch the surface.

Take care that excessive dust does not build up in the air-intake and air-outlet grill, and clean it occasionally using a dry brush or vacuum cleaner.

Store the fan in a cool dry place when not in use, in its original carton if possible.

12

Image 14
Contents Sunbeam Brushed Remote Control Tower Fan Contents Sunbeam’s Safety Precautions Safety Precautions For Your Tower Fan Important Instructions Retain For Future UseLocating Your Tower Fan Always locate your fan on a flat level surfacePower button Features Of Your Sunbeam Tower FanRemote control storage Carry handleFan speed button Nature modeRemote control Auto Off buttonLower the tower onto the base Assembling Your Tower FanRemove the screws from beneath the tower Screw the tower to the base Clip the cord into placeSwitching the fan off Using Your Tower FanSwitching the fan on Selecting a fan speed settingUsing the remote control Changing the batteriesUsing the auto off timer Using the oscillation functionPress the button on either the fan or Remote. If your remote control fails to operate check the following Troubleshooting GuideCare And Cleaning If your tower fan fails to operate check the followingAustralia Year Replacement GuaranteeSunbeam Service Centres New ZealandConsumer Hotline