Cutting -4, 4B, 4C, 4D, Stopping Fig | Tanaka TBC-250, TBC-340/D

TBC-250/250PF/PFD,TBC-2501,TBC-2510,TBC-270PF/PFD TBC-270PN/PND,TBC-300/SDH/3010,TBC-340/D,TBC-340PF/D

Owner’s Manual

Cutting (Fig. 2-4, 4B, 4C, 4D)

•When cutting, operate engine at over 6500 rpm. Extended use at a low rpm will wear the clutch prematurely.

•Cut grass from right to left.

•Blade thrust may occur when the spinning blade contacts a solid object in the critical area. A dangerous reaction may occur causing the entire unit and operator to be thrust violently. This reaction is called BLADE THRUST. As a result, the operator may lose control of the unit which may cause serious or fatal injury. Blade thrust is more likely to occur in areas where it is difficult to see the material to be cut.

•Wear the harness as shown in the figure (if so equipped). The blade turns counterclockwise, therefore, be advised to operate the unit from right to left for efficient cutting. Keep onlookers out of working area at least 15 m (50 ft.).

NOTE!

Press the quick release button or pull emergency release flap (if so equipped) in the event of emergency. (Fig. 2-4C)

WARNING!

If your cutting attachment should strike against stones or other debris, stop the engine and make sure the attachment and related parts are undamaged. When grass or vines wrap around attachment, stop the engine and remove them.

Stopping (Fig. 2-5)

•Decrease engine speed and run at an idle for a few minutes, then turn off ignition switch.

WARNING!

A cutting attachment can injure while it continues to spin after the engine is stopped or power control is released. When the unit is turned off, make sure the cutting attachment has stopped before the unit is set down.

www.tanaka-usa.com

custsvc@tanaka-ism.com

TBS270PF/PN, TBC-300/SDH3010, TBC-2501, TBC-250, TBC-340PF/PFD specifications

Tanaka’s innovative range of welders, including the TBC-250PF/PFD, TBC-2510, TBC-270PFD/PND, TBC-2501, and TBC-300/SDH/3010, has positioned the brand as a leader in providing high-quality welding solutions. These machines are widely recognized for their durable construction, advanced technology, and user-friendly features, making them ideal for both industrial and commercial applications.

The TBC-250PF/PFD series is equipped with a powerful inverter system that ensures high-efficiency performance and consistent arc. Its Pulse function allows for precise welding, which is particularly useful for thin materials or delicate projects. This model also incorporates soft start technology, reducing the initial current surge, protecting both the machine and the workpiece from damage.

Moving on to the TBC-2510, this model stands out for its versatility and capacity to handle a variety of welding processes, including TIG and MIG. It features a digital display for easy monitoring and adjustments, along with an automatic temperature control system that prevents overheating. The TBC-2510's compact design also makes it highly portable, suited for both shop and fieldwork.

The TBC-270PFD/PND further enhances the lineup with its dual-functionality for MIG and flux-cored welding. This machine includes advanced synergic control technology, allowing users to set wire diameter and gas type, automatically adjusting the parameters for optimal welding results. The inclusion of a built-in cooling system helps prolong the machine's lifespan by preventing overheating during extended use.

In the TBC-2501, Tanaka introduces a model that combines robust performance with ease of use. Designed for both beginners and experienced welders, it features adjustable welding current and a simple interface, making it accessible to a wide range of users. Its lightweight construction enhances portability, allowing for easy transport to job sites.

Lastly, the TBC-300/SDH/3010 showcases the brand's commitment to innovation with its state-of-the-art welding technology. It offers a combination of high welding speed and quality, making it perfect for high-demand applications. This unit also incorporates advanced safety features, ensuring operator protection during use.

In conclusion, the Tanaka TBC welding machines represent a perfect blend of advanced technology, user-friendly designs, and durable construction, catering to the diverse needs of the welding industry. Their features make them suitable for both novice and seasoned welders, becoming an invaluable tool in any workshop or construction site.