HEART RATE MONITORING
“TELEMETRY ONLY“ - locks out contact heart rate signals and will only detect telemetry signals. Set your console to this default.
“BOTH HR OFF“ - turns off the ability to detect any signal at all. Used in rare situations where there is excessive interference with the heart rate signals. This option turns off disables the Constant HR program and the Fitness Test program.
Error Messages
Text line messages are only seen in the Constant Heart Rate and Fitness Test programs due to the design of the program that necessitates a valid heart rate signal at all times during the program.
“CHECK HR BELT” - The heart rate signal has been missing for the last 30 seconds in telemetry signal detection.
“HR BELT NEEDED” - No telemetry belt signal been sensed during the initial setup time.
“HR MODE DISABLED” - No heart rate signal is allowed due to the set up option that was chosen. Heart rate monitoring is not possible.
Page 11
