7000 PT CONSOLE
Quick Scan Programming
You can quickly access any of the custom menus by pressing [LEVEL: ^],
[4], [ENTER]. The console will then display “MACHINE STATUS.” Scroll through the following options:
[ SELECT ] | “ RUN HOURS | XXXX” | 0 |
[ SELECT ] | “ WORKOUTS | XXXX” | 1 |
[ SELECT ] | “ DISTANCE | XXXX” | 2 |
[ SELECT ] | “ CONS 90211- XXX ” | 3 | |
[ SELECT ] | “ STEPMILL” |
| 4 |
[ SELECT ] |
|
| |
[ SELECT ] | “ MAINT HOURS xxxx” | 6 | |
Resetting the Maintenance Hour Counter
For ease of maintenance records, the Stepmill® console has a maintenance timer that will clock the number of hours, workouts, and time between last servicing. After each maintenance period reset the counter.
[ ^ ] [ 7 ] [ 1 ] Reset Service
1.Reset the maintenance hour counter by pressing [LEVEL: ^], [7], [1]. The console will dusplay “RESET SERVICE.” Press [ENTER]. The console will display “DONE.” Press [CLEAR] to return to the starting screen.
Configuration Code
The Stepmill console supports other StairMaster® exercise systems. It is important to verify that the machine configuration code matches the type of machine you have. Speed control problems, along with other problems, can occur if the console is not set up correctly.
[ ^ ] [ 8 ] [ 0 ] Change Machine
1.Change the machine type by pressing [LEVEL: ^], [8], [0]. The console will display “CHANGE MACHINE.” Press [ENTER]. The console will then display the current machine type. Use the [SELECT] key to toggle between options. Press [ENTER] for the desired option.
Page 30
