INSTALLATION INSTRUCTIONS
Before leaving the manufacturing facility in Tulsa, Oklahoma, your StairMaster® Stepmill® 7000 PT exercise system was thoroughly inspected and tested for proper operation. To minimize shipping damage, careful attention was given to making your machine ready for shipment.
The dimensions of the machine are listed in Table 1. Throughout this manual, all references to the left or right side and to the front or back are made as if you were on the machine, ready to exercise.
Table 1. Dimensions and Specifications for the | |
StairMaster 7000 PT Exercise System | |
|
|
Physical Dimensions: |
|
Length | 50.0 inches (127 cm) |
Width | 29.0 inches (74 cm) |
Height | 78.0 inches (198 cm) |
Weight | 409 pounds (186 kg) |
Power Supply Specifications: |
|
Output Voltage | 12 to 19 VDC |
Output Current Capacity | 2.5 amps |
Input Power Consumption | 55 watts |
|
|
The machine requires minor assembly before operation. You will need a pair of diagonal cutters or a pair of
1.Roll the machine to its desired location on its temporary wheels.
2.Have an assistant tilt the machine forward until the wheels are off the floor. Make sure the assistant can support the machine so you can remove the temporary wheels.
Page 3
