Stairmaster 7000 manual Initial Service, Preventive Maintenance, Cleaning and Inspecting

MAINTENANCE INSTRUCTIONS

INITIAL SERVICE

Upon receiving your machine, use a soft, clean towel to wipe off the dust which may have accumulated during shipping. Your new machine will require minor assembly. Refer to the “Installation Instructions” section of this Manual for details.

PREVENTIVE MAINTENANCE

The procedures for performing the recommended preventive maintenance

are summarized in Table 3. The schedule is based on normal usage in a commer- cial health club environment; adjust the schedule to meet actual machine usage. Refer to the “Parts Removal and Replacement” section of this Manual for all disassembly and assembly instructions.

!WARNING

TO AVOID INJURY DUE TO SLIPPERY PEDAL SURFACES, DO NOT USE PETROLEUM-BASED CLEANERS OR ARMORALL-TYPE PROTECTANTS ANYWHERE ON THIS MACHINE OR THE FLOOR MATS.

Cleaning and Inspecting

1.DO NOT USE GLASS CLEANERS OR ANY OTHER HOUSEHOLD CLEANER ON THE CONSOLE. Clean the console daily with a water-dampened cloth and wipe dry after cleaning.

2.Clean the exterior of your Stepmill® 7000 PT exercise system daily with soap and water.

3.Thoroughly clean the entire machine at least once a week.

4.Inspect the painted surfaces of the exposed frame for any rust, bubbling or chips during the weekly cleaning. The salt in perspiration can damage the unpainted surfaces. Repair the damaged area with a rust-inhibitor paint. Contact our Customer Service Department at 800-331-3578 to order a touch-up paint kit.

Page 32