PARTS REMOVAL AND REPLACEMENT
Back Cover
1.Remove the 8 fasteners and lift the back cover away from the frame.
2.Align the holes in the frame and the back cover. Secure the back cover with the 8 fasteners.
Bottom Cover
1.Remove both side covers to gain access to the bottom cover fasteners.
2.Disconnect the DC power cable.
3.Remove the six fasteners and remove the bottom cover from the frame.
4.Reinstall the bottom cover, then the two side covers. Remember to connect the DC power cable.
CONSOLE
1.Locate the mounting knobs on the back of the console (See cutaway view Below).
2.Loosen and remove the four mounting knobs and lock washers.
3.Lift up the console and unplug the console cable from the back of the console.
4.Remove the console from the frame.
5.Reinstall the console by reversing the steps.
Page 52
