Meridian America DSP7200 manual Outline Technical Specification

808.2 Outline Technical Specification

THD & Noise:	Better than -96dBFS
Mechanism:	Triple-beam laser, multi-speed CD/DVD-ROM transport
Converters:	192kHz-capable, 24-bit, Delta Sigma converters operating at 4 x CD sample rate (176.4kHz)
Stereo Outputs:
Analogue –	1 x unbalanced on phono, 1 x balanced on XLR-3M: 2.3vrms fixed/variable, 47Ω impedance
Digital –	Coax unbalanced (S/PDIF), RJ45 balanced (AES/EBU) digital interface for single-cable connection of other Meridian
	equipment. Operating at up to 2 x CD sample rate (88.2kHz), 24-bit with MHR option. Proprietary oversampling filter for
	superb reproduction of CD and similar sources
Stereo Inputs (808i only):
Analogue –	6 x unbalanced on phono
Digital –	3 x coax unbalanced (S/PDIF) and 2 x Toslink optical
Formats:	CD Audio (CD-DA), CD-R, CD-R/W
Connections:	Two 5-pin 240° DIN sockets for Meridian Comms and RS232 full remote/configuration interface
	Three programmable 12v trigger outputs. RJ45 for single-cable SpeakerLink connection to other Meridian equipment
Construction:	Black lacquer or satin silver finish in metal & glass
Dimensions:	480mm (18.9in) x 175mm (6.9in) x 411mm (16.2in) (WHD)
Controls:	Front-panel keys for Open/Close, Play, Stop, Pause, Previous, Next, On/Off. Additional controls behind hinged front
	access cover include Repeat, Fast Forward/Reverse, Display, Mute, Volume Up/Down, Store/Clear; Source
	Full remote control via MSR+ IR remote (supplied) and RS232
Display:	20-character dot matrix display with adjustable brightness and contrast. Indicators for Phase, Repeat and EQ (emphasis)
Power Input:	Universal power supply for 100–240Vac, 50/60Hz, 25W

DSP7200 Outline Technical Specification

Performance:	Frequency response in-room within 3dB from 30Hz to over 20kHz. Maximum output >112dB spl @ 1m on music
	material. Noise less than 15dB spl. Overall distortion typically <0.02% at any frequency or level
Inputs:	1 x phono digital input (S/PDIF), 1 x balanced digital (AES/EBU) input on RJ45; 32kHz–96kHz sampling rates at up to
	24 bit; MHR support. RJ45 SpeakerLink input also carries RS232 and trigger
Outputs:	1 x RJ45 SpeakerLink output with balanced digital audio and control for a second loudspeaker
	Carries infra-red pick up for system automation
Construction:	‘3½-way’ acoustic reflex system. 2 x 200mm long-throw bass drivers. 1 x 160mm polypropylene mid driver
	1 x 25mm aluminium-dome tweeter, silver wire, short horn-loaded
	Gloss black or silver piano-lacquer cabinet, other colours available to order
Electronics:	FIFO memory buffer input for the lowest possible jitter from almost any source. Analogue gain & filtering with proprietary
	Meridian error-corrected discrete amplification. Digital & conversion electronics utilise advanced surface-mount
	techniques and partitioned 6-layer printed-circuit boards. 4 x 24-bit 128x oversampling D/A converters for maximum
	audio quality. Proprietary oversampling filter for superb reproduction of CD and similar sources. 4 x tailored 100W power
	amplifiers – one per driver
Dimensions:	350/180 (13.75/7.1) W, 1072 (42.25) H (no feet), 415/217 (16.5/8.5) D [base/top, mm (in)] (vertical version)
	See engineering drawing for full dimensioning
Weight:	55kg (121 lb) each (vertical version)
Controls:	Rear-panel switch for Power On/Off. Remote operation via MSR+ and RS232
Front display:	Eight-character display with system lights, may be turned off