New Holland T5050 specifications Engine, Electrical, Transmission, Pto, Point Hitch, Hydraulics

New Holland

T5000 Series Tractor Specifications

T5040 T5050 T5060 T5070

ENGINE*	T5040	T5050	T5060	T5070
Type	.......................................................	New Holland 4-cycle diesel, parent-bore block
Cylinders/Aspiration	.................................................................	4 / Turbocharged and intercooled
Displacement, cu. in. (L)	274 (4.5)	274 (4.5)	274 (4.5)	274 (4.5)
Rated speed, rpm	2300	2300	2300	2300
Gross engine hp (kW)	85 (63.4)	95 (70.9)	105 (78.3)	115 (85.7)
PTO hp (kW)	70 (52.2)	80 (59.7)	90 (67.1)	96 (71.6)
Torque rise	43%	39%	47%	30%
Air cleaner	..........................................................................	Dry type, dual element
Fan	........................................................	10-blade fixed, 18.9-in. (480 mm) diameter
Emission legislation	Tier III	Tier III	Tier III	Tier III
Fuel tank capacity, gal. (L)	33.5 (127)	33.5 (127)	33.5 (127)	33.5 (127)
ELECTRICAL
System voltage, volts	12	12	12	12
Battery, cca	960	960	960	960
Alternator, amps	120	120	120	120
Cold start aid	...................................................................................	Grid heater
TRANSMISSION
Standard configuration: Base	.........................................	12x12 with a mechanical shuttle		12x12 power shuttle
Option 1	............................	................12x12 with a power shuttle		—
Option 2	............................	.....20x12 Creeper with a mechanical shuttle		—
Deluxe configuration	.........................................	24x24 with a Dual Command™ electrohydraulic power shuttle
Clutch type / size (mechanical)	............................	......... Dry / 12-inch (305 mm) diameter, heavy-duty cerametallic material
Clutch type / size (electrohydraulic)	............................	...................... Wet / six plates 5.2 in. (133 mm), organic material
Gears: 2–9 mph working range**	............................	...............12x12 Transmission: 7 gears; 24x24 Transmission: 14 gears
Gears: <1 mph**	............................	............................................20x12 Creeper: 7 gears
Maximum speed**, mph (kph)	............................	.......................Standard Tractor: 19 (30); Deluxe Tractor: 25 (40)
PTO
Type	..............................................................................	Fully independent
Base speed	540 rpm	.................................540/1000 rpm with interchangeable shaft
Operator control, Standard configuration	.........................................	Mechanical engagement, optional: Electrohydraulic engagement
Operator control, Deluxe configuration	....................................................................	Electro-hydraulic engagement
Engine speed	............................	.......2199 engine rpm at 540 PTO rpm; 2261 engine rpm at 1000 PTO rpm
Shaft size	............................	....................540 rpm: 1-3/8, 6 spline / 1000 rpm: 1-3/8, 21 spline
3-POINT HITCH
Category	II	II	II	II
Draft sensing	...........................	.......................................Mechanical, lower link sensing
Base ASAE lift capacity @ 24 in., lbs. (kg)	5745 (2605)	5745 (2605)	5745 (2605)	5745 (2605)
Optional ASAE lift capacity @ 24 in., lbs. (kg)	6805 (3086)	6805 (3086)	6805 (3086)	6805 (3086)
Base equipment	...........................Flexible link arms, telescoping stabilizers, Lift-O-Matic™upper/lower limit setting
HYDRAULICS
System type	Open center	Open center	Open center	Open center
System pressure, psi (bar)	2871 (198)	2871 (198)	2871 (198)	2871 (198)
Implement pump flow, gpm (L/min.)	16.1 (61)	16.1 (61)	16.1 (61)	16.1 (61)
Steering & services pump, gpm (L/min.)	10.4 (39.5)	10.4 (39.5)	10.4 (39.5)	10.4 (39.5)
Hydraulic flow @ mid-mount valve gpm (L/min.)	...........................	..............................................maximum 21.0 (79.5)
Remote valves, Standard configuration	.................................................................................	Open center
Remote valves, Deluxe configuration	............................	Closed center with flow control (one less flow control than number of remotes)
Remotes — Base / optional	...........................	.........................................2 / 3 (4 & 5 w/ loader valve)

Page 1of 2