Sharp CD-BA2100 How To Use The Built-Intimer, To cancel timer operation, To change the sleep time

Models: CD-BA2100

1 18
Download 18 pages 42.88 Kb
Page 15
Image 15
HOW TO USE THE BUILT-IN TIMER

HOW TO USE THE BUILT-IN TIMER

Before setting the timer, make sure that the clock setting is correct. (Page 6)

(Main unit operation)

TIMER/

POWER SLEEP Timer set indicator

ON/

STAND-BY

TUNER (BAND)

 

CD

 

TAPE

 

(1

2)

 

VIDEO/

 

AUX

 

TUNING/
MEMORY/

SET

TIME

 

 

 

( )

 

 

3

4

5

Timer playback

1 Press the ON/STAND-BY button to turn the power on.

2 Press the CD, TUNER (BAND), TAPE (1 V 2) or VIDEO/AUX button to select the desired function.

3 Press the TIMER/SLEEP button repeatedly until "f PLAY" is displayed.

The timer set indicator will flash.

4 Press the TUNING/TIME (X or W) button to set the hour start time, then press the MEMORY/SET but- ton.

5 Press the TUNING/TIME (X or W) button to set the minute start time, then press the MEMORY/SET but- ton.

The power will be automatically turned off, then the timer set indicator will light up and finally the "f PLAY" will be disappeard.

6 When the preset time is reached, the volume will increase gradually until it reaches the volume you were listening to before turning off the unit.

7 If you select CD or TAPE, the power will be turned off after the tape or CD is finished playing back.

If you select TUNER or VIDEO/AUX, the power will be turned off one hour later.

Note:

When performing timer playback using an external unit connected to the VIDEO/AUX jacks, only the power of the main unit will be turned off automat- ically. (The power of the external unit will not be turned off.)

Timer recording

1 Press the ON/STAND-BY button to turn the power on.

Load a cassette for recording into the TAPE 2 cassette com- partment.

2 Press the TUNER (BAND) or VIDEO/AUX button to select the desired function.

3 Press the TIMER/SLEEP button repeatedly until "f REC" is displayed.

The timer set indicator will flash.

4 Press the TUNING/TIME (X or W) button to set the hour start time, then press the MEMORY/SET button.

5 Press the TUNING/TIME (X or W) button to set the minute start time, then press the MEMORY/SET button.

The power will be automatically turned off, then the timer set indicator will light up and finally the "f REC" will be disap- peard.

6 When the preset time is reached, the timer recording will start.

The volume will increase gradually until it reaches the volume you were listening to before turning off the unit.

7 When the recording tape reaches its end, the timer recording will end, and the power will be turned off.

To cancel timer operation:

Press the ON/STAND-BY button to turn the power on.

To change the programmed contents:

Start again from step 1.

Note:

Once the time is set, the setting will be retained until a new time is entered.

Sleep operation

The radio, compact disc and cassette deck can all be turned off automatically.

1 Play back the desired sound source.

2 Press the TIMER/SLEEP button repeatedly until "SLEEP" is displayed.

To change the sleep time:

While the sleep time is displayed, press the TUNING/TIME (X or W) button to adjust the time.

(Maximum: 3 hours - Minimum: 1 minute)

The amount of sleep time can also be changed during the sleep operation.

3 hours - 5 minutes 5-minute intervals

5 minutes - 1 minute 1-minute intervals

3 Press the MEMORY/SET button.

4 The unit will turn off automatically after the preset sleep time has elapsed.

Note:

Once the sleep time is set, it will remain the same duration until the setting is changed.

To confirm the remaining sleep time:

Press the TIMER/SLEEP button.

To cancel the sleep operation:

Press the ON/STAND-BY button to enter the stand-by mode.

14

Page 15
Image 15
Sharp CD-BA2100 How To Use The Built-Intimer, To cancel timer operation, To change the programmed contents, Timer, Tape