Sharp CD-BA2100 operation manual Recording

Models: CD-BA2100

1 18
Download 18 pages 42.88 Kb
Page 14
Image 14
RECORDING

RECORDING

When recording important selections, be sure to make a preliminary test to ensure that the desired material is being properly recorded.

The VOLUME, X-BASS and EQUALIZER controls may be adjusted with no effect on the recorded sig- nal (Variable Sound Monitor).

REC PAUSE

POWER

ON/

STAND-BY

CD

TAPE (1Manual background2)

TUNER (BAND)

TAPE 1

TAPE 2

 

CD

 

TAPE

 

TAPE 2

CD

TAPE(1 2)

ON/

TUNER

STAND-BY

(BAND)

 

Recording from the built-in radio

1 Tune in to the desired station. (See pages 11-12.)

2 Load a cassette into the TAPE 2 cassette compart- ment.

3 Press the REC PAUSE (● 6) button.

"REC" will flash.

4 Press the 0 / R (TAPE 2 0) button.

"REC" will appear.

Note:

If a whistling noise is heard while recording from an AM station, move the AM loop antenna to a position where noise is no longer heard from the unit.

To stop recording:

Press the (TAPE ) button.

Metal and CrO2 tapes should not be used for recording or dubbing.

Recording from the built-in CD player (CD Synchronized Recording System)

1 Press the ON/STAND-BY button to turn the power on. 2 Press the CD button and load the desired disc.

Use the APMS function to store the tracks you want to record in memory. (See page 10.)

3 Load a cassette into the TAPE 2 cassette compartment. 4 Press the REC PAUSE (● 6) button.

"SYNC" and "REC" will flash.

5 Press the 0 /R (TAPE 2 0) button.

"SYNC" will disappear and "REC" will light up.

CD playback will start approximately 5 seconds after the tape starts.

To stop recording:

Press the (CD ) button.

The CD and tape will stop.

Note:

When the end of the tape is reached while recording, the CD player will display the track number which was being played at that time, and stop automatically.

If you want to restart recording from the beginning of the in- terrupted track, turn over the tape, press the REC PAUSE (● 6) button and then the 0/R (TAPE 2 0) button.

(If tracks have been stored in memory using the APMS func- tion, recording will restart from the first track stored in memory.)

Dubbing from tape to tape

1 Press the ON/STAND-BY button to turn the power on.

2 Load a prerecorded cassette into the TAPE 1 cassette com- partment. Insert a blank tape into the TAPE 2 cassette com- partment.

It is recommended that the recording tape be the same length as the master tape.

3 Press the TAPE (1 V 2) button until "TAPE 1" appears in the display.

4 Press the REC PAUSE (● 6) button.

5 Press the 0 / R (TAPE 2 0) button.

To stop dubbing:

Press the (TAPE ) button.

TAPE 1 and TAPE 2 will simultaneously stop.

Erasing recorded tapes

Make sure that TAPE 1 is not in use.

1 Load the tape to be erased into the TAPE 2 cassette com- partment.

2 Press the TAPE (1 V 2) button until "TAPE 2" appears in the display.

3 Press the REC PAUSE(● 6) button.

4 Press the 0 / R(TAPE 2 0) button.

13

Page 14
Image 14
Sharp CD-BA2100 operation manual Recording