(Continued)
(Main unit operation)
(Main unit operation)
When bright
When dark
■Demo mode
When the AC power cord is first connected, the unit will enter the demonstration mode.
To cancel the demonstration mode:
When the unit is in the
●The demonstration mode will be canceled and the unit will be in the low power consumption mode.
To return to the demonstration mode:
When the unit is in the
Notes:
●When the unit is in the low power consumption mode, the display will disappear.
●When the power is on, the
■To change the brightness of the display
Press the DIMMER button.
●The display will be made dimmer.
To return to the original brightness:
Press the DIMMER button again.
●2 "AA" size batteries
●Batteries are not included.
8" - 20'
(0.2 m - 6 m)
15 | 15 |
■Remote control
●When inserting or removing the batteries, push them toward the ë battery terminals.
●Installing the batteries incorrectly may cause the unit to mal- function.
Precautions for battery use:
●Insert the batteries according to the direction indicated in the battery compartment.
●Replace all old batteries with new ones at the same time.
●Do not mix old and new batteries.
●Remove the batteries if they are weak or if the unit will not be used for long periods of time. This will prevent potential damage due to battery leakage.
Caution:
Do not use rechargeable batteries
Notes concerning use:
●Replace the batteries if the operating distance is reduced or if the operation becomes erratic.
●Periodically clean the transmitter LED on the remote control and the sensor on the main unit with a soft cloth.
●Exposing the sensor on the main unit to strong light may in- terfere with operation. Change the lighting or the direction of the unit.
●Keep the remote control away from moisture, excessive heat, shock, and vibrations.
5