Sharp CD-BA2100 Preparation For Use, Speaker connection, ZExample left channel onlyY

PREPARATION FOR USE

1	2	3
		Blue
		Red
		Black
Right speaker		Left speaker

●Unplug the AC power cord from the AC outlet before con- necting or disconnecting any component.

■Speaker connection

Connect each speaker wire to the SPEAKER terminals as shown. Use speakers with an impedance of 6 ohms or more, as lower impedance speakers can damage the unit.

1 Connect the upper black wire to the MAIN(−) terminal and the blue wire to the MAIN(+) terminal.

2 Connect the lower black wire to the SUBWOOFER(−) terminal and the red wire to the SUBWOOFER(+) terminal.

Caution:

●Never mistake the connections to the MAIN and the SUB- WOOFER terminals.

Wrong connection may damage the main unit or the speakers.

●Model CP-BA2100 is the exclusive speaker for the CD- BA2100.

Do not use it for other models.

Besides, do not connect other speakers to the CD-BA2100 speaker terminals.

Such connections can damage the main unit.

●Do not mistake the right channel for the left channel when connecting the speakers to the unit.

The right speaker is the one on the right side when you are facing the front of the unit.

●Do not let the bare speaker wires touch each other as this may damage the amplifier and/or speakers.

●Do not stand or sit on the speakers. If the speakers fall or collapse, you may be injured.

ZExample: left channel onlyY

Amplifier for mid-to-high range frequencies

(200 Hz - 20 kHz)

Power

Superamplifier tweeter

Tweeter	Pre-
	ampli-
Woofer	fier
		L-ch

Pre-

Subwooferampli- Power fier

amplifier

Amplifier for ultra-low range frequencies (20 Hz - 200 Hz)

Bi-amp system:

●This product drives the built-in subwoofer unit and the speaker unit composed of the super tweeter, tweeter and woofer for mid-to-high range frequencies with independent amplifiers which have individual frequency characteristics.

As a result, both units can avoid the sound interference and can create clear sound.

3