MTD 510 warranty Table of Contents, Finding and Recording Model Number

Page 2

This Operator’s Manual is an important part of your new log splitter. It will help you assemble, prepare and maintain the unit for best performance. Please read and understand what it says.

Table of Contents

Safety Labels

Page 3

Maintaining Your Log Splitter

............Page 12

Safe Operation Practices

Page 4

Troubleshooting

Page 16

Setting Up Your Log Splitter

Page 6

Illustrated Parts List

Page 18

Operating Your Log Splitter

Page 8

Warranty

Back Cover

Finding and Recording Model Number

STOP

BEFORE YOU START ASSEMBLING

YOUR NEW EQUIPMENT

 

Please locate the model plate on the equipment and copy the information to the sample model plate provided to the right. You can locate the model plate by standing behind the unit and looking down at the hydraulic tank. This information will be necessary to use the web site or obtain assistance from your White Outdoor dealer.

 

MTD LLC

www.whiteoutdoor.com

P. O. BOX 361131

CLEVELAND,OH 44136

DEALER LOCATOR PHONE NUMBER: 800-949-4483

Please do NOT return the unit to the retailer from which it was

purchased, without first contacting Customer Support.

Customer Support

If you have difficulty assembling this product or have any questions regarding the controls, operation, or maintenance of this unit, you can seek help from the experts. To reach a local White Outdoor dealer or retailer, visit www.whiteoutdoor.com or or phone our Customer Support line at (800)-949-4483.

Engine Information

The engine manufacturer is responsible for all engine-related issues with regard to performance, power-rating, specifications, warranty and service. Please refer to the engine manufacturer’s Owner’s/Operator’s Manual packed separately with your unit for more information.

2

Page 1 Page 3
Image 2
Page 1 Page 3
Contents 04/25/2006 Log Splitter ModelMTD LLC, P.O. BOX 361131 CLEVELAND, Ohio Customer Support Engine Information Table of ContentsFinding and Recording Model Number Safety Labels Found On Your Log Splitter Preparation Your ResponsibilityGeneral Practices Use only your hand to operate the controls Maintenance and StorageOperation Do not tow machine faster than 45mphAssembling the Tongue Setting Up Your Log SplitterConnecting Cylinder to Beam Attaching the Jack StandPreparing the Log Splitter Function of the controls on the engine Know Your Log SplitterBeam Locks Engine Controls Support latch bracket. See FigureControl Handle Stopping EngineGas and Oil Fill-Up Starting EngineOperating Tips Using the Log SplitterBefore Each Use Split wood along the grain lengthwise only Raising and Lowering BeamTransporting the Log Splitter NeverConditions that Will Void Warranty Gib AdjustmentWedge Assembly Adjustment Adjustment Bolt Jam Nut Gib Lock NutHose Clamps Hydraulic Fluid and Inlet FilterBeam and Splitting Wedge EngineSet Screw Install nylon spider onto engine coupling halfTires Side View-Coupler 0600Storing Your Log Splitter Replace spark plugProblem Cause Remedy Cause RemedyConditions Low horsepower/weak engine Engine stalls during Low horsepower/weak engineService dealer RetractingModel 712-3058 Hex Lock Nut, 1/2-20 712-0711 Hex Jam Nut 3/8-24 Wedge AssemblyHydraulic Cylinder Hex Cap Screw 3/8-24 xMANUFACTURER’S Limited Warranty for MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio 44136-0019 Phone
Top Page Image Contents