MTD 510 warranty Safety Labels Found On Your Log Splitter

Page 3

Safety Labels Found On Your Log Splitter

��	��
��	��
��
��	��
��	��
��

��

Safety Labels

��		��
��	��
	��
	��
	��
	��
	�	��
	��
	�	��
	��
	��
	�
		��

��

� ��

��

� ��

��

� ��

WARNING

DO NOT remove safety (or any) labels from log splitter for any reason.

��

��		��	��
��		�	��
		��
��		�	��
��
		��	��
��	��	��
		�	��
��
��		��
		�	��
��
�	��

Image 3

Contents Log Splitter Model MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio04/25/2006 Table of Contents Finding and Recording Model NumberCustomer Support Engine Information Safety Labels Found On Your Log Splitter Your Responsibility General PracticesPreparation Do not tow machine faster than 45mph Maintenance and StorageOperation Use only your hand to operate the controlsAttaching the Jack Stand Setting Up Your Log SplitterConnecting Cylinder to Beam Assembling the TonguePreparing the Log Splitter Support latch bracket. See Figure Know Your Log SplitterBeam Locks Engine Controls Function of the controls on the engineStarting Engine Stopping EngineGas and Oil Fill-Up Control HandleUsing the Log Splitter Before Each UseOperating Tips Never Raising and Lowering BeamTransporting the Log Splitter Split wood along the grain lengthwise onlyAdjustment Bolt Jam Nut Gib Lock Nut Gib AdjustmentWedge Assembly Adjustment Conditions that Will Void WarrantyEngine Hydraulic Fluid and Inlet FilterBeam and Splitting Wedge Hose ClampsSide View-Coupler 0600 Install nylon spider onto engine coupling halfTires Set ScrewReplace spark plug Storing Your Log SplitterCause Remedy Problem Cause RemedyRetracting Engine stalls during Low horsepower/weak engineService dealer Conditions Low horsepower/weak engineModel Hex Cap Screw 3/8-24 x Wedge AssemblyHydraulic Cylinder 712-3058 Hex Lock Nut, 1/2-20 712-0711 Hex Jam Nut 3/8-24MTD LLC, P.O. BOX 361131 CLEVELAND, Ohio 44136-0019 Phone MANUFACTURER’S Limited Warranty for